Customized Items ×

Choose an item to customize and generate a quotation

FFQ4 D-MM-06 : Fast feed endmills with MULTI-MASTER threaded adaptation carrying single-sided square inserts with 4 cutting edges

Designation	DCX Cutting diameter maximum	DC	APMX	AE Maximum plunging width	CICT Number of inserts (or edges for solid tool)	THSZMS	LF	OAL	DCONMS	DRVS Width across flats (wrench should be ordered separately)	RMPX° Maximum ramping angle	MDN Machinable diameter minimum for interpolation	MDX Machinable diameter maximum for interpolation	Refers to the Multi-Master thread connection.	MIID Master insert identification
FFQ4 D16/.63-03-MMT10-06	16.00	7.20	0.70	4.4	3	T10	16.00	27.30	15.20	13.0	6.0	23.20	31.00	28.0	FFQ4 SOMT 060210T	0.02	0.9
FFQ4 D20-04-MMT12-06	20.00	11.20	0.70	4.4	4	T12	25.00	38.30	18.80	16.0	3.5	31.20	39.00	28.0	FFQ4 SOMT 060210T	0.05	0.9
FFQ4 D25/.98-05-MMT15-06	25.00	16.20	0.70	4.4	5	T15	30.00	47.00	24.00	20.0	2.2	41.20	49.00	40.0	FFQ4 SOMT 060210T	0.09	0.9
FFQ4 D32/1.26-07-MMT21-06	32.00	23.20	0.70	4.4	7	T21	30.00	53.10	29.40	24.0	1.4	55.20	63.00	110.0	FFQ4 SOMT 060210T	0.17	0.9

Do not apply lubricant to the MULTI-MASTER threaded connection.
To generate a straight surface without cusps, the width of cut must not exceed DC.
Radius for programing: for insert SOMT 1.7 mm, for insert SOMW 1.9 mm.
When mounting insert SOMW, APMX=0.6 mm
For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%.