Page 10 - MILLING_CATALOG_INCH_2022_P361-P592

SLOTTING & SLITTING CUTTERS
MM GRIT-22K/P,28K/P DC CW≤.047 RE CW
THSZMS
Interchangeable DMIN
Solid Carbide Small Diameter CDX
Groove Milling Heads
CDX
CW CDX

Dimensions

IC528
Designation DC CW CDX (2) NOF (3) RE DMIN (4) THSZMS
MM GRIT 22K-0.76-0.00 (1) .854 .030 .059 4 .0000 .866 T08 MM EGR 20-22* •
MM GRIT 22K-0.86-0.00 (1) .854 .034 .067 4 .0000 .866 T08 MM EGR 20-22* •
MM GRIT 22K-0.96-0.00 (1) .854 .038 .075 4 .0000 .866 T08 MM EGR 20-22* •
MM GRIT 22K-1.00-0.05 .854 .039 .079 4 .0020 .866 T08 MM EGR 20-22* •
MM GRIT 22P-1.00-0.05 .854 .039 .079 4 .0020 .866 T08 MM EGR 20-22* •
MM GRIT 22K-1.20-0.05 (1) .854 .047 .177 4 .0020 .866 T08 MM EGR 20-22* •
MM GRIT 22K-1.40-0.05 (1) .854 .055 .177 4 .0020 .866 T08 MM EGR 20-22* •
MM GRIT 22K-1.57-0.00 .854 .062 .177 4 .0000 .866 T08 MM EGR 20-22* •
MM GRIT 22K-1.70-0.10 (1) .854 .067 .177 4 .0039 .866 T08 MM EGR 20-22* •
MM GRIT 22P-1.70-0.10 (1) .854 .067 .177 4 .0039 .866 T08 MM EGR 20-22* •
MM GRIT 22K-1.95-0.20 (1) .854 .077 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-2.00-0.20 .854 .079 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22P-2.00-0.20 .854 .079 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-2.25-0.20 (1) .854 .089 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-2.39-0.20 .854 .094 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-2.50-0.20 .854 .098 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22P-2.50-0.20 .854 .098 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-2.75-0.20 (1) .854 .108 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-3.00-0.20 .854 .118 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22P-3.00-0.20 .854 .118 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-3.17-0.20 .854 .125 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-3.25-0.20 (1) .854 .128 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22P-3.81-0.20 .854 .150 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-4.00-0.20 .854 .157 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22P-4.00-0.20 .854 .157 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22P-4.00-2.00 .854 .157 .177 4 .0787 .866 T08 MM EGR 20-22* •
MM GRIT 22K-4.25-0.20 (1) .854 .167 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-4.25-1.20 (1) .854 .167 .177 4 .0472 .866 T08 MM EGR 20-22* •
MM GRIT 22K-4.75-0.20 .854 .187 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-5.25-0.20 (1) .854 .207 .177 4 .0079 .866 T08 MM EGR 20-22* •
MM GRIT 22K-6.00-3.00 .854 .236 .177 4 .1181 .866 T08 MM EGR 20-22* •
MM GRIT 28K-2.50-0.2 1.091 .098 .236 6 .0079 1.102 T10 T-40/3 L* •
MM GRIT 28K-5.25-0.2 1.091 .207 .236 6 .0079 1.102 T10 T-40/3 L* •
MM GRIT 28P-7.0-3.5 1.091 .276 .224 6 .1378 1.102 T10 T-40/3 L* •
MM GRIT 28K-10.0-0.2 1.091 .394 .236 6 .0079 1.102 T10 T-40/3 L* •
• Recommended for O-rings and retaining rings • K - for general steel & cast iron machining P - for soft and gummy materials
• Modification options on request • Do not apply lubricant to the threaded connection • For clamping instructions, see pages 91-92
• For user guide, see pages 410-416 • For shanks, see pages 83-90
(1) For circle clips according to DIN471/472 and ANSI B27.7M
(2) Cutting depth maximum
(3) Number of flutes
(4) Minimum bore diameter
* Optional, to be ordered separately

370 ISCAR