Page 6 - MILLING_CATALOG_INCH_2022_P361-P592

THUB OAL
SLOTTING & SLITTING CUTTERS
MM TS-C LH THSZMS CW CDX
Interchangeable Solid Carbide
Circlip Groove Milling Heads DC DCONMS
According to DIN 471/472
45˚ t
CW±.0008 RE LF CDX R.012

Dimensions

IC928
Designation DC CW CDX LF t RE THUB LH OAL DCONMS NOF (1) THSZMS
MM TS127C118T035-6T05 .500 .046 .014 .088 .011 .0020 .118 .106 .332 .303 6 T05 T-20/3* •
MM TS127C118T040-6T05 .500 .046 .016 .088 .013 .0020 .118 .106 .332 .303 6 T05 T-20/3* •
MM TS127C118T050-6T05 .500 .046 .020 .088 .017 .0020 .118 .106 .332 .303 6 T05 T-20/3* •
MM TS127C138T050-6T05 .500 .054 .020 .088 .017 .0020 .118 .106 .340 .303 6 T05 T-20/3* •
MM TS225C138T060-6T08 .886 .054 .024 .121 .020 .0020 .177 .165 .373 .461 6 T08 T-40/3 L* •
MM TS225C138T070-6T08 .886 .054 .028 .121 .024 .0020 .177 .165 .373 .461 6 T08 T-40/3 L* •
MM TS225C138T085-6T08 .886 .054 .033 .121 .029 .0020 .177 .165 .373 .461 6 T08 T-40/3 L* •
MM TS225C168T070-6T08 .886 .066 .028 .127 .024 .0039 .177 .165 .385 .461 6 T08 T-40/3 L* •
MM TS225C168T085-6T08 .886 .066 .033 .127 .029 .0039 .177 .165 .385 .461 6 T08 T-40/3 L* •
MM TS225C168T100-6T08 .886 .066 .039 .127 .035 .0039 .177 .165 .385 .461 6 T08 T-40/3 L* •
MM TS225C193T100-6T08 .886 .076 .039 .132 .035 .0039 .177 .165 .395 .461 6 T08 T-40/3 L* •
MM TS225C193T125-6T08 .886 .076 .049 .132 .044 .0039 .177 .165 .395 .461 6 T08 T-40/3 L* •
MM TS225C223T150-6T08 .886 .088 .059 .138 .054 .0039 .177 .165 .407 .461 6 T08 T-40/3 L* •
MM TS225C273T150-6T08 .886 .107 .059 .148 .055 .0079 .177 .161 .426 .461 6 T08 T-40/3 L* •
MM TS225C273T175-6T08 .886 .107 .069 .148 .065 .0079 .173 .154 .426 .461 6 T08 T-40/3 L* •
MM TS225C325T175-6T08 .886 .128 .069 .173 .065 .0079 .201 .181 .447 .461 6 T08 •
• For shanks, see pages 83-90 • For tightening torques and clamping instructions, see pages 91-92 • Do not apply lubricant to the threaded connection
• For user guide, see pages 410-416
(1) Number of flutes
* Optional, to be ordered separately

MM TS-DG .018 max. LF
depth of cut
Double Groove Internal A L DRVS THSZMS
Grooving Heads with a
Threaded Connection for Heat DC ±0.0019 DCONMS
Exchanger Tube Sheets RE.012 Typx4
.024
.118 .236 .118 A L3
Dimensions

IC908
Designation DC DCONMS PHD (1) THSZMS NOF (2) LF L3 L DRVS (3)
MM TS155-04T10-8238 .610 .630 .625 T10 4 1.339 .713 .555 .394 MM KEY 10X7* •
MM TS185-04T12-8239 .728 .726 .750 T12 4 1.358 .720 .571 .512 MM KEY 13X8* •
MM TS245-04T15-8240 .965 .941 1.000 T15 4 1.472 .433 .567 .787 MM KEY 20* •
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection • For user guide, see pages 410-416
(1) For minimum tube outer diameter
(2) Number of flutes
(3) Clamping wrench size
* Optional, to be ordered separately

366 ISCAR