Page 10 - Turning_catalog_INCH_2022_45_P691-914

THREADING GIQR/L-WT NUT Dimensions PNA RE PDPT Left-hand shown

WF
Internal Inserts with Whitworth
L
Partial Profile for Threading
in .31" and Larger Holes

55°

SCREW
Designation L RE PNA PDPT (1) WF DMIN TPIN (2) TPIX (3) IC528
GIQR/L 8-WT-0.05 .306 .002 55.0 .059 .189 .315 16.00 50.00 •
GIQR/L 11-WT-0.05 .420 .002 55.0 .079 .264 .433 11.00 50.00 •
• Can be used for thread milling by circular interpolation • TPI min D/59 • D-diameter of thread (pitch max<=W) • For cutting speed recommendations, see page 781
(1) Cutting depth maximum
(2) Threads per inch minimum
(3) Threads per inch maximum
For tools, see pages: MG (466) • MGCH (466)

OAL
DCONMS X
PICCO-55°-Thread OHN PDX
55°
Inserts for 55° Internal PDX
Thread Profile a WF HC
x CF
Right-hand shown
NUT Dimensions
55°

SCREW
Designation DCONMS TPIX (1) TPIN (2) HC CF PDX WF a OHN (3) OAL DMIN IC228
PICCO R 005.5548-15 .197 48.00 24.00 .016 .002 .02 .075 .173 .591 1.181 .189 •
PICCO R 006.5548-15 .236 48.00 24.00 .016 .002 .02 .091 .209 .591 1.181 .236 •
PICCO R 006.5524-15 .236 24.00 16.00 .032 .005 .03 .091 .209 .591 1.181 .236 •
PICCO R 007.5524-15 .276 24.00 16.00 .032 .005 .03 .110 .248 .591 1.181 .276 •
• All mini-bars have sharp corners • For detailed cutting data, see page 781
(1) Threads per inch maximum
(2) Threads per inch minimum
(3) Minimum overhang
For holders, see pages: GHPCOR (459) • PICCO ACE (434) • PICCO/MG PCO (Holder) (435)

700 ISCAR