Milling
Main Application

Profiling
Sub Application

Customized Items ×
Choose an item to customize and generate a quotation
     
TR6 ER-M : Multifunction endmills with FLEXFIT threaded adaptation that carry four different insert geometries.(-)Multifunction Endmills with FLEXFIT Threaded Adaptation That Carry Four Different Insert Geometries(+)
Representative Image
Tool shown with TR6 TNCU inserts
 
Representative Image
Tool shown with TR6 TNCU inserts
 
 COOLANT THROUGH TOOL
  Designation  GIFUT5DCX DCX_2 DCX_3 DCX_4 DC DC_2 DC_4 APMX APMX_2 APMX_3 APMX_4 APMXU  BHTA  CICT  LF LF_2 LF_3 LF_4 RMPX°_2 OAL OAL_2 OAL_3 OAL_4 DCONMS THSZMS MIID MIID_2  MIID_3  MIID_4  DRVS  TQ_3  HAND IC CCMS CSP  ZEFF GICATGIREMgiic
  TR6 ER D16/0.63-2-M08-07    016.0016.0016.00-14.0012.10-1.000.602.50-2.0018.0224.6424.9025.00-1.342.2042.4042.50-13.00M08TR6 TNCU 070210TRFF TXMT 0702TR90 TXMT 070204-11.0200.03R~5.30~SAI02C0120~1~~3320744 0
  TR6 ER D20/0.79-4-M10-07    020.0020.0020.00-18.0016.10-1.000.602.50-2.0018.0424.6424.9025.00-1.044.7044.9045.00-18.00M10TR6 TNCU 070210TRFF TXMT 0702TR90 TXMT 070204-15.0290.05R~5.30~SAI02C0120~1~~3320745 0
  TR6 ER D25/0.98-5-M12-07    025.0025.0025.00-23.0021.10-1.000.602.50-2.0018.0529.6429.9030.00-0.751.7051.9052.00-21.00M12TR6 TNCU 070210TRFF TXMT 0702TR90 TXMT 070204-17.0330.08R~5.30~SAI02C0120~1~~3320746 0
  TR6 ER D32/1.26-6-M16-07    032.0032.0032.00-30.0028.10-1.000.602.50-2.0018.0634.6434.9035.00-0.559.7059.9060.00-29.00M16TR6 TNCU 070210TRFF TXMT 0702TR90 TXMT 070204-25.0400.18R~5.30~SAI02C0120~1~~3320747 0
  TR6 ER D35/1.38-6-M16-07    035.0035.0035.00-33.0031.10-1.000.602.50-2.0018.0634.6434.9035.00-0.559.7059.9060.00-29.00M16TR6 TNCU 070210TRFF TXMT 0702TR90 TXMT 070204-25.0400.19R~5.30~SAI02C0120~1~~3320748 0
  TR6 ER D25/0.98-3-M12-10    025.0024.6025.0026.8020.0020.6020.602.500.804.003.004.2017.0324.9725.1525.1225.121.747.0047.1546.9147.1221.00M12TR6 TNCU 100425TRFF TXMT 1004TR90 TXMT 100408TR45 TXMT 100419.0330.06R~7.30~SAI02C0000~1~~3346857 0
  TR6 ER D32/1.26-4-M16-10    032.0031.6032.0033.8027.0027.6027.602.500.804.003.004.2017.0434.9735.1535.1235.121.260.0060.1559.9160.1229.00M16TR6 TNCU 100425TRFF TXMT 1004TR90 TXMT 100408TR45 TXMT 100425.0400.17R~7.30~SAI02C0150~1~~3344364 0
  TR6 ER D35/1.38-5-M16-10    035.0034.6035.0036.8030.0030.6030.602.500.804.003.004.2017.0534.9735.1535.1235.121.160.0060.1559.9160.1229.00M16TR6 TNCU 100425TRFF TXMT 1004TR90 TXMT 100408TR45 TXMT 100425.0400.18R~7.30~SAI02C0120~1~~3320737 0
Note: The dimensions refer to master inserts, for other insert radii and geometries dimensions click on "More Info"
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter


Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved