ISCAR Cutting Tools - Metal Working Tools - Milling - Facing

Customized Items ×

Choose an item to customize and generate a quotation

H400 ER-M : Endmills with FLEXFIT threaded connection carrying double-sided inserts with four radius cutting edges (HELIDO ROUND H400 LINE).(-)Endmills with FLEXFIT Threaded Connection Carrying Double-Sided Inserts with Four Radius Cutting Edges(+)

Representative Image

Designation	DCX	DC	DCONMS	CICT	APMX	LF	OAL	DRVS	RMPX°	THSZMS	MIID	TQ_3		RE	CCMS	CSP	HAND	IC	ZEFF	GICAT
H400 ER D20-2-M10-10	20.00	10.00	16.60	2	7.50	25.00	45.00	15.0	-	M10	H400 RNHU 1004-ML	29	0.04	5.00~	SAI02C0100$$$$~	1~	R~	~	2~	3105998
H400 ER D25-3-M12-10	25.00	15.00	21.00	3	7.50	28.00	50.00	19.0	5.8	M12	H400 RNHU 1004-ML	33	0.07	5.00~	SAI02C0120$$$$~	1~	R~	~	3~	3105999
H400 ER D32-5-M16-10	32.00	22.00	29.60	5	7.50	35.00	60.00	25.0	3.8	M16	H400 RNHU 1004-ML	40	0.17	5.00~	SAI02C0160$$$$~	1~	R~	~	5~	3106000
H400 ER D25-2-M12-12	25.00	13.00	21.60	2	8.70	28.00	50.00	19.0	5.6	M12	H400 RNHU 1205-AX	33	0.07	6.00~	SAI02C0120$$$$~	1~	R~	~	2~	3106113
H400 ER D32-4-M16-12	32.00	20.00	28.40	4	8.70	35.00	60.00	25.0	5.6	M16	H400 RNHU 1205-AX	40	0.15	6.00~	SAI02C0160$$$$~	1~	R~	~	4~	3105949
H400 ER D40-5-M16-12	40.00	28.00	29.00	5	8.70	35.00	60.00	25.0	3.7	M16	H400 RNHU 1205-AX	40	0.19	6.00~	SAI02C0160$$$$~	1~	R~	~	5~	3106269

When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter

Milling
Main Application

Facing
Sub Application

Site Map

Milling Main Application

Facing Sub Application

Site Map

Milling
Main Application

Facing
Sub Application