ISCAR Cutting Tools - Metal Working Tools - Milling - Facing

Customized Items ×

Choose an item to customize and generate a quotation

FDN-LN12 : Full slot cutters carrying LNET 12 tangentially mounted inserts. A very effective solution for parting quality parts such as bearing caps at high cutting speeds (TANGSLOT).(-)Full Slot Cutters Carrying LNET 12... Tangentially Mounted Inserts(+)

Representative Image

Related tools for : BT40 SEM 40X75

Designation	DC	CWN	CWX	CDX	CICT	ZEFP	DHUB	DCONMS	LU	OAL	Arbor		L	HAND	MIID	KAPR	NOF	CCMS	CSP	CW	DCX	ZEFF	GICAT	GIREM
FDN D160-10-40-LN12	160.00	10.00	12.00	44.00	16	8	80.00	40.00	33.5	50.00	B	1.75	12.70~	R~	LNET 126508-TN	90.0~	16~	FDA02G4000H$07~	0~	~	~	8~	3102449	For ap=10.0 and 10.5 use screw SR 14-500-L8.5 @For ap=12.0 use screw SR 14-500-L10.0
FDN D200-08-40-LN12	200.00	8.00	10.00	51.50	20	10	92.00	40.00	49.5	50.00	C	2.63	12.70~	R~	LNET 125516-TN	90.0~	20~	SPK01G4000H$07~	0~	~	~	10~	3102815	For ap=8.0 and 8.5 use screw SR 14-500-L7.0 @For ap=9.0 use screw SR 14-500-L8.0 @For ap=10.0 use screw SR 14-500-L8.5
FDN D200-10-40-LN12	200.00	10.00	12.00	51.50	20	10	92.00	40.00	49.5	50.00	C	3.00	12.70~	R~	LNET 126508-TN	90.0~	20~	SPK01G4000H$07~	0~	~	~	10~	3102450	For ap=10.0 and 10.5 use screw SR 14-500-L8.5 @For ap=12.0 use screw SR 14-500-L10.0

Slot width depends on the selected insert width.
Each tool is supplied with screws for the thinnest specified insert.
Verify use of correct screw for the insert being used.

Milling
Main Application

Facing
Sub Application

Site Map

Milling Main Application

Facing Sub Application

Site Map

Milling
Main Application

Facing
Sub Application