Designation	DC	APMX	APMX_2	KAPR Tool cutting edge angle	CICT Number of inserts (or edges for solid tool)	LU Max.drilling depth	LF	OAL	THSZMS	DCONMS	DRVS Torque key size	RMPX° Maximum ramping angle	MDN Minimum diameter to obtain a flat-bottom pocket having no protrusions by use of helical or circular interpolation	MDX Maximum diameter to obtain a flat-bottom pocket having no protrusions by use of helical or circular interpolation	MIID Master insert identification
MDR D16/.63-2-MMT10-07JHP	16.00	7.30	4.70	90.0	2	12.00	23.00	34.30	T10	15.20	13.0	90.0	16.80	30.80	MDR ANMU 07	0.07
MDR D20/.79-2-MMT12-09JHP	20.00	8.90	5.70	90.0	2	15.00	24.70	38.00	T12	18.30	16.0	90.0	21.80	38.20	MDR ANMU 09	0.08
MDR D25/.98-2-MMT15-12JHP	25.00	11.50	6.50	90.0	2	18.50	33.00	50.00	T15	23.90	20.0	90.0	26.30	47.60	MDR ANMU 12	0.08

Do not apply lubricant to the MULTI-MASTER threaded connection
When drilling holes deeper than 5 mm, it is recommended to use the pecking method (G83)
For adaptation, click on "More Info"