Customized Items ×
Choose an item to customize and generate a quotation
  
PDJNR/L : Lever lock tools carrying 55° negative rhombic inserts.(-)Lever Lock Tools Carrying 55° Negative Rhombic Inserts(+)
Representative Image
Right-hand shown
 
Representative Image
Right-hand shown
 
Related inserts for : PDJNR 2020K-15


DNMG-CERMET
Double-Sided 55° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications


DNMG-F3S
Double-Sided 55° Rhombic Inserts for Titanium and Heat Resistant Materials for Finishing Applications


DNGA-J(CBN)
55° Rhombic Multi-Cornered CBN Inserts for Machining Hardened Steel


DNGA (CBN)
Negative 55° Rhombic Inserts & Negative Relief Angle with Single CBN Tip for Finishing Hardened Steel and Cast Iron


DNGA (PCD)
Negative 55° Rhombic Inserts & Negative Relief Angle with Single PCD Tip for Finishing Non-Ferrous Materials


DNGA 2MT (CBN)
Negative 55° Rhombic Inserts with 2 CBN Mini Tips and Wiper for Hardened Steel and Cast Iron


DNGA 2MT MM (CBN)
Negative 55° Rhombic Inserts with 2 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron


DNGA 4MT (CBN)
Negative 55° Rhombic Inserts with 4 CBN Mini Tips and Wiper for Hardened Steel and Cast Iron


DNGA 4MT MM (CBN)
Negative 55° Rhombic Inserts with 4 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron


DNGA MT (CBN)
Negative 55° Rhombic Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron


DNGA MT (PCD)
Negative 55° Rhombic Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials


DNMG-F3P
Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing on Steel


DNMG-M3P
Double-Sided 55° Rhombic Inserts for Medium Machining Conditions on Steel


DNMX-M3P
Double-Sided 55° Rhombic Inserts with High Helical Cutting Edge for High Metal Removal Rates


DNMM-R3P
Single-Sided 55° Rhombic Inserts for Rough Turning Applications on Steel


DNMG-F3M
Double-Sided 55° Rhombic Inserts for Finish on Turning Stainless and Low Carbon Steel


DNMG-M3M
Double-Sided 55° Rhombic Inserts for Machining Stainless and Low Carbon Steel


DNMG/DNGG-TF
Double-Sided 55° Rhombic Inserts for Machining a Wide Range of Materials under Medium Cutting Conditions


DNMG-GN
Double-Sided 55° Rhombic Inserts for General Applications


DNMG-NR
Double-Sided 55° Rhombic Inserts with a Special Chipformer for Heavy Machining


DNMG/DNGG-PP
55° Double-Sided Rhombic Inserts for Machining Very Ductile Materials under Medium Cutting Conditions


DNMG-VL
Double-Sided 55° Rhombic Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves


DNMG-PF
Double-Sided 55° Rhombic Inserts for Finishing Applications on Alloyed and Stainless Steel


DNMG/DNGG-SF
Double-Sided 55° Rhombic Inserts for Super Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut


DNMG-NF
Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing Applications


DNMM-NM
Single-Sided 55° Rhombic Inserts for Roughing Applications


DNMG-WG
Double-Sided 55° Rhombic Wiper Inserts for High Surface Finish at High Feed Turning


DNMS-12
55° Rhombic Single-Sided Inserts for Soft and Nonferrous Materials


DNMA
Double-Sided 55° Rhombic Inserts for Short Chipping Materials such as Cast Iron


DNGA (CER)
Negative 55° Rhombic Double-Sided Ceramic Inserts for Machining Cast Iron and Hardened Steel


DNMA (CBN)
CBN Inserts with a Flat Rake for Machining Hardened Steel


DNGA-4 (CBN)
55° Rhombic 4-Cornered CBN Inserts for Machining Hardened Steel


DNGA-2 (CBN)
55° Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys


DNGG-M4HF/M4HM (CBN)
55° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel

Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved