ISCAR Cutting Tools - Metal Working Tools - Groove-Turn & Parting - Face Grooving & Turning

Customized Items ×

Choose an item to customize and generate a quotation

HFAIR/L-DG : Adapters for internal face grooving and turning, Dmin 55 mm.(-)Adapters for Internal Face Grooving and Turning(+)

Representative Image

Right-hand shown

Representative Image

Right-hand shown

Designation	CW	DAXN	DAXX	CDX	WF	OHX	OAL	HAND	CSP	APMX	Tool typ	GICAT
HFAIL 75C-4T30DG	4.00	75.0	140.0	30.00	10.9	34.5	68.50	L	~	4.00~	ADAPTER~	2500726
HFAIR 75C-4T30DG	4.00	75.0	140.0	30.00	10.9	34.5	68.50	R	~	4.00~	ADAPTER~	2500725
HFAIL 140C-4T30DG	4.00	140.0	-	30.00	10.9	34.5	68.50	L	~	4.00~	ADAPTER~	2500728
HFAIR 140C-4T30DG	4.00	140.0	-	30.00	10.9	34.5	68.50	R	~	4.00~	ADAPTER~	2500727
HFAIL 55C-5T25DG	5.00	55.0	70.0	25.00	11.9	32.0	66.00	L	~	5.00~	ADAPTER~	2550023
HFAIR 55C-5T25DG	5.00	55.0	70.0	25.00	11.9	32.0	66.00	R	~	5.00~	ADAPTER~	2550021
HFAIL 70C-5T25DG	5.00	70.0	95.0	25.00	11.9	32.0	66.00	L	~	5.00~	ADAPTER~	2550024
HFAIR 70C-5T25DG	5.00	70.0	95.0	25.00	11.9	32.0	66.00	R	~	5.00~	ADAPTER~	2550022
HFAIL 95C-5T35DG	5.00	95.0	130.0	35.00	11.9	39.5	73.50	L	~	5.00~	ADAPTER~	2500730
HFAIR 95C-5T35DG	5.00	95.0	130.0	35.00	11.9	39.5	73.50	R	~	5.00~	ADAPTER~	2500729
HFAIL 130C-5T38DG	5.00	130.0	180.0	38.00	11.9	42.5	76.50	L	~	5.00~	ADAPTER~	2500732
HFAIR 130C-5T38DG	5.00	130.0	180.0	38.00	11.9	42.5	76.50	R	~	5.00~	ADAPTER~	2500731
HFAIL 180C-5T38DG	5.00	180.0	-	38.00	11.9	42.5	76.50	L	~	5.00~	ADAPTER~	2500734
HFAIR 180C-5T38DG	5.00	180.0	-	38.00	11.9	42.5	76.50	R	~	5.00~	ADAPTER~	2500733
HFAIL 70C-6T28DG	6.00	70.0	100.0	28.00	12.0	35.0	69.00	L	~	6.00~	ADAPTER~	2550027
HFAIR 70C-6T28DG	6.00	70.0	100.0	28.00	12.0	35.0	69.00	R	~	6.00~	ADAPTER~	2550025
HFAIL 100C-6T32DG	6.00	100.0	180.0	32.00	12.0	39.0	73.00	L	~	6.00~	ADAPTER~	2550028
HFAIR 100C-6T32DG	6.00	100.0	180.0	32.00	12.0	39.0	73.00	R	~	6.00~	ADAPTER~	2550026
HFAIL 180C-6T38DG	6.00	180.0	-	38.00	12.4	42.5	76.50	L	~	6.00~	ADAPTER~	2500736
HFAIR 180C-6T38DG	6.00	180.0	-	38.00	12.4	42.5	76.50	R	~	6.00~	ADAPTER~	2500735

After initial groove, no limitation to widening groove outward or toward center
DGN & GRIP inserts can be used only on right-hand tools, HFPR/L right-hand inserts on right-hand tools (same for left-hand), and HGPL inserts only on left-hand tools.
For information regarding compatibility with the HATA system, please refer to the additional information provided for each of the intermediate serrated cartridges: IH-HFAIR

Groove-Turn & Parting
Main Application

Face Grooving & Turning
Sub Application

Site Map

Groove-Turn & Parting Main Application

Face Grooving & Turning Sub Application

Site Map

Groove-Turn & Parting
Main Application

Face Grooving & Turning
Sub Application