ISCAR Cutting Tools - Metal Working Tools - Milling - Slanted Shoulder & Chamfer

Customized Items ×

Choose an item to customize and generate a quotation

HM90 E90A-M-10 : HELI2000 90° endmills with a FLEXFIT threaded adaptation carrying HM90 AP.. 1003... inserts.(-)90° Endmills with a FLEXFIT Threaded Adaptation Carrying HM90 AP.. 1003... Inserts(+)

Representative Image

Related tools for : APCT 1003PDR-HM

Designation	DC	DC_2	DCX_2	CICT	DCONMS	THSZMS	LH	LF	OAL	OAL_2	APMX	APMX_2	RMPX°	RMPX°_2	MDN	MDX	CSP	DRVS	TQ_3	RPMX	MIID	MIID_2		L	HAND	CCMS	NOF	KAPR	DCX	LU	ZEFF	GICAT
HM90 E90A-D16-2-M08	16.00	7.00	16.10	2	14.75	M08	24.0	30.00	47.50	47.13	9.80	1.00	15.0	15.0	23.10	31.20	0	9.6	20	66712	APKT 1003PDR-HM	APKT 1003R8T-FF	0.03	10.00~	R~	SAI02C0080$$$$~	2~	90.0~	~	~	2~	3194670
HM90 E90A-D20-3-M10	20.00	11.00	20.10	3	18.00	M10	30.0	30.00	50.00	49.63	9.80	1.00	7.5	7.5	31.10	39.20	1	15.1	29	55578	APKT 1003PDR-HM	APKT 1003R8T-FF	0.05	10.00~	R~	SAI02C0100$$$$~	3~	90.0~	~	~	3~	3110728
HM90 E90A-D20-3-M12	20.00	11.00	20.10	3	21.00	M12	24.0	30.00	52.00	51.63	9.80	1.00	7.5	7.5	31.10	39.20	1	17.1	33	55578	APKT 1003PDR-HM	APKT 1003R8T-FF	0.06	10.00~	R~	SAI02C0120$$$$~	3~	90.0~	~	~	3~	3102520
HM90 E90A-D25-3-M12	25.00	16.00	25.10	3	21.00	M12	35.0	35.00	57.00	56.63	9.80	1.00	2.5	2.5	41.10	49.20	1	17.1	33	47512	APKT 1003PDR-HM	APKT 1003R8T-FF	0.08	10.00~	R~	SAI02C0120$$$$~	3~	90.0~	~	~	3~	3102521
HM90 E90A-D25-4-M12	25.00	16.00	25.10	4	21.00	M12	35.0	35.00	57.00	56.63	9.80	1.00	2.5	2.5	41.10	49.20	1	17.1	33	47512	APKT 1003PDR-HM	APKT 1003R8T-FF	0.08	10.00~	R~	SAI02C0120$$$$~	4~	90.0~	~	~	4~	3110729
HM90 E90A-D32-4-M16	32.00	23.00	32.10	4	29.00	M16	35.0	35.00	60.00	59.63	9.80	1.00	3.0	3.0	55.10	63.20	1	25.1	40	35614	APKT 1003PDR-HM	APKT 1003R8T-FF	0.16	10.00~	R~	SAI02C0160$$$$~	4~	90.0~	~	~	4~	3110714

1- with standard square insert
2- with FF (fast feed) insert
For adaptation, click on "More Info".
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter

Milling
Main Application

Slanted Shoulder & Chamfer
Sub Application

Site Map

Milling Main Application

Slanted Shoulder & Chamfer Sub Application

Site Map

Milling
Main Application

Slanted Shoulder & Chamfer
Sub Application