ISCAR Cutting Tools - Metal Working Tools - Milling -

Customized Items ×

Choose an item to customize and generate a quotation

HM90 E90AD-M-15 : 90° endmills with a FLEXFIT threaded adaptation carrying HM90 ADKT-1505... inserts.(-)90° Endmills with a FLEXFIT Threaded Adaptation Carrying HM90 ADKT-1505... Inserts(+)

Designation	DC	CICT	APMX	DCONMS	THSZMS	LH	LF	OAL	RMPX°		CSP	DRVS	TQ_3		L3	Semi- (Q)	PD	HAND	Insert	Pocket	MIID	MIID_2	CNSC	CXSC	ISYC	ISCTMP	ISCTMP_2	ClssID	BMC	CCFMS	CCMS	CCTMS	NOF	ZADJ	ZNP	GTC	KAPR	APMX_2	ClssID_2	CUBPMS	CZCMS	DC_2	DCX	GTC_2	IIC	IIC_2	IIC_3	IIC_4	IIC_5	ISYC_2	KAPR_2	LU	OAL_2	RPMX	SPI	TCDCONMS	UST	ZEFF	ZEFP	GICAT
HM90 E90AD-D25-2-M12	25.00	2	14.30	21.00	M12	30.8	35.00	57.00	11.5	Y~	1~	19.0	33	0.08	15.00~	1~	RC~	R~	AD 1505~	AD 1505~	ADKT 1505PDTR	ADCT 1505R8T-FF~	1~	3~	307-01~	GEMLT010100~	GEMLT060100~	71E01A05D27A8~	S~	02~	SAI02C0120$$$$~	SAI~	2~	0~	2~	MILSQI_MSAI02~	90.0~	3.50~	71E01A05D27A8~	C~	0120~	25.00~	~	MILSQI_MSAI02~	IS$$1130240221216590~	IS$$1139853956892540~	IS$$1217073251666820~	IS$$1226686987342770~	IS$$928840815344555~	307-02~	~	~	57.00~	~	~	$$$$~	M~	2~	2~	3110730
HM90 E90AD-D32-3-M16	32.00	3	14.30	29.00	M16	40.0	40.00	65.00	5.3	Y~	1~	25.0	40	0.16	15.00~	1~	RF~	R~	AD 1505~	AD 1505~	ADKT 1505PDTR	ADCT 1505R8T-FF~	1~	3~	307-01~	GEMLT010100~	GEMLT060100~	71E01A05D27A8~	S~	02~	SAI02C0160$$$$~	SAI~	3~	0~	3~	MILSQI_MSAI02~	90.0~	3.50~	71E01A05D27A8~	C~	0160~	32.00~	~	MILSQI_MSAI02~	IS$$1130240221216590~	IS$$1139853956892540~	IS$$1217073251666820~	IS$$1226686987342770~	IS$$928840815344555~	307-02~	~	~	65.00~	~	~	$$$$~	M~	3~	3~	3110707
HM90 E90AD-D40-4-M16	40.00	4	14.30	29.00	M16	40.0	40.00	65.00	4.0	Y~	1~	25.0	40	0.21	15.00~	1~	RF~	R~	AD 1505~	AD 1505~	ADKT 1505PDTR	ADCT 1505R8T-FF~	1~	3~	307-01~	GEMLT010100~	GEMLT060100~	71E01A05D27A8~	S~	02~	SAI02C0160$$$$~	SAI~	4~	0~	4~	MILSQI_MSAI02~	90.0~	3.50~	71E01A05D27A8~	C~	0160~	40.00~	~	MILSQI_MSAI02~	IS$$1130240221216590~	IS$$1139853956892540~	IS$$1217073251666820~	IS$$1226686987342770~	IS$$928840815344555~	307-02~	~	~	65.00~	~	~	$$$$~	M~	4~	4~	3110708

For adaptation, click on "More Info"
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter

Milling
Main Application

Site Map

Milling Main Application

Site Map

Milling
Main Application