ISCAR Cutting Tools - Metal Working Tools - Milling - Drill Mill

MM FF : Interchangeable 2 flute FEEDMILL solid carbide heads for milling at very high feeds and small D.O.C.

Economical solution

Designation	DC	NOF	APMX	RE	Rg	THSZMS	LS	DCONMS	LF	a°	KAPR	Ft	RMPX°	fz (min)	fz (max)	Ys (WTA)	Xs (LTA)	Mod	DCX	D Inner	BMC	S3	S1		CCFMS	CCMS	CCTMS	ClssID	CNSC	COATP	CSP	CUBPMS	CXSC	CZCMS	DN	FF/RN/P	GRDMFG	GTC	HAND	ISCTMP	ISYC	OAL	TCDCONMS	TCDCONWS	UST	Utility	ZEFF	ZEFP	GICAT	giic	Tough ‹————› Hard Grade & Vc
MM FF100R1.5-L12-2T06	10.00	2	0.60	2.00~	2.00	T06	6.7~	9.60	12.50	7~	97.0	Profiling~	7.0	0.30	0.60	5.00~	12.50~	ML310~	10.00~	6.70~	H~	3~	1~	0.01~	01~	SAI01C0060$$$$~	SAI~	71E01A05D27A8~	0~	~	0~	C~	0~	0060~	~	FF~	~	MILFS_MSAI01~	R~	GEMLS060110~	303-02~	19.15~	$$$$~	h9~	C~	U~	2~	2~	5605166	1	IC908
MM FF120R2.0-2T08	12.00	2	0.68	2.50~	2.50	T08	8.0~	11.50	11.10	7~	97.0	Profiling~	7.0	0.50	1.00	6.00~	11.30~	ML310~	12.00~	8.26~	H~	3~	1~	0.01~	01~	SAI01C0080$$$$~	SAI~	71E01A05D27A8~	0~	~	0~	C~	0~	0080~	~	FF~	~	MILFS_MSAI01~	R~	GEMLS060110~	303-02~	19.05~	$$$$~	h9~	C~	U~	2~	2~	5606048	2	IC908 IC903
MM FF500R08-L59-2T08	12.70	2	0.68	2.50~	2.50	T08	8.0~	11.50	15.00	5~	95.0	Profiling~	7.0	0.50	1.00	0.00~	0.00~	ML310~	12.70~	8.96~	H~	3~	1~	0.02~	01~	SAI01C0080$$$$~	SAI~	71E01A05D27A8~	0~	~	0~	C~	0~	0080~	~	FF~	~	MILFS_MSAI01~	R~	GEMLS060110~	303-02~	22.95~	$$$$~	h9~	C~	U~	2~	2~	5696877	1	IC908
MM FF160R2.0-2T10	16.00	2	1.10	3.00~	3.00	T10	11.8~	15.20	13.50	7~	97.0	Profiling~	7.0	0.55	1.10	0.00~	0.00~	ML310~	16.00~	9.95~	H~	3~	1~	0.03~	01~	SAI01C0100$$$$~	SAI~	71E01A05D27A8~	0~	~	0~	C~	0~	0100~	~	FF~	~	MILFS_MSAI01~	R~	GEMLS060110~	303-02~	25.25~	$$$$~	h9~	C~	U~	2~	2~	5605013	1	IC908
MM FF200R2.0-2T12	20.00	2	1.50	3.40~	3.40	T12	13.8~	18.45	17.40	5~	95.0	Profiling~	7.0	0.75	1.50	10.00~	17.50~	ML310~	20.00~	11.75~	H~	3~	1~	0.05~	01~	SAI01C0120$$$$~	SAI~	71E01A05D27A8~	0~	~	0~	C~	0~	0120~	~	FF~	~	MILFS_MSAI01~	R~	GEMLS060110~	303-02~	31.20~	$$$$~	h9~	C~	U~	2~	2~	5605216	1	IC908

For clamping keys (should be ordered separately), tightening torques and clamping instructions, click on "More Info".
Do not apply lubricant to the threaded connection.

For cutting speed recommendations, click on the required grade number related to specific item geometry

TECHKNOW

Milling
Main Application

Drill Mill
Sub Application

Site Map

TECHKNOW

Milling Main Application

Drill Mill Sub Application

Site Map

Milling
Main Application

Drill Mill
Sub Application