Customized Items ×
Choose an item to customize and generate a quotation
  
PCLNR/L-CA : 95° lead angle exchangeable cartridges carrying the negative 80° diamond inserts.(-)95° Lead Angle Exchangeable Cartridges Carrying the Negative 80° Diamond Inserts(+)
Representative Image
Right-hand shown
 
Representative Image
Right-hand shown
 
Related inserts for : PCLNR/L-CA :


CNGA (CER)
Negative 80° Rhombic Double-Sided Inserts for Machining Cast Iron, Hardened Steel, and Heat-Resistant Alloys


CNMA
Double-Sided 80° Rhombic Inserts for Short Chipping Materials such as Cast Iron


CNMG-GN
Double-Sided 80° Rhombic Inserts for General Applications


CNMG-NF
Double-Sided 80° Rhombic Inserts for Semi-Finishing and Finishing Applications


CNMG/CNGG-PP
Double-Sided 80° Rhombic Inserts for Machining Very Ductile Materials under Medium Cutting Conditions


CNMG/CNGG-TF
Double-Sided 80° Rhombic Inserts for Machining a Wide Range of Materials under Medium Cutting Conditions


CNMG-WG/NRW
Double-Sided 80° Rhombic Wiper Inserts for High Feed Turning and High Surface Finish


CNMM-NM
Single-Sided 80° Rhombic Inserts for Roughing Applications


CNMS-12
80° Rhombic Single-Sided Inserts for Soft and Nonferrous Materials


CNMG/CNGG-SF
Double-Sided 80° Rhombic Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut


CNMG-NR
Double-Sided 80° Rhombic Inserts with a Special Chipformer for Heavy Machining


CNMA-T/M1/WG (CBN)
80° Rhombic Inserts with a Single CBN Top Corner Tip for Machining Cast Iron, Hardened Steel and Super Alloys


CNMG-WF
Double-Sided 80° Rhombic Wiper Inserts for Finishing Operations at High Feeds


CNGA-4 (CBN)
4-Cornered CBN Inserts for Machining Hardened Steel


CNMA (PCD)
80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications


CNMM-M4PW
Very Positive Radial Insert with a Helical Cutting Edge and Positive Rake for Heavy Machining Applications


CNGA-2 (CBN)
80° Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys


CNMA-MW4 (CBN)
80° Rhombic Inserts with 4 CBN Wiper Edge Tips for Machining Hardened Steel


CNGG-M4HF/M4HM (CBN)
80° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel


CNMG-M3M
Double-Sided 80° Rhombic Inserts for Machining Stainless and Low Carbon Steel


CNMG-F3P
Double-Sided 80° Rhombic Inserts for Semi-Finishing and Finishing Applications


CNMM-R3P
Single-Sided 80° Rhombic Inserts for Rough Turning Applications on Steel


CNMG (CER)
80° Rhombic Double-Sided Inserts with a T-Land for Machining Cast Iron and Hardened Steel


CNMG-M3P
Double-Sided 80° Rhombic Inserts for Medium Machining Conditions on Steel


CNMG-F3M
Double-sided 80° Rhombic Inserts for Stainless Steel Finishing Applications


CNMG-VL
Double-Sided 80° Rhombic Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves


CNMG-CERMET
Double-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications


CNMG-F3S
Double-Sided 80° Rhombic Inserts for Titanium and Heat Resistant Materials for Finishing Applications


CNGA-J(CBN)
Multi-Cornered CBN Inserts for Machining Hardened Steel


CNGG-J(CBN)
80° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel


CNMG-R3P
Double-Sided 80° Rhombic Inserts with a Chipformer for Rough Machining


CNGA (CBN)
Negative 80° Rhombic Inserts with Negative Relief Angles and Single CBN Tip for Finishing Hardened Steel and Cast Iron


CNGA (PCD)
Negative 80° Rhombic Inserts with Negative Relief Angle and Single PCD Tip for Finishing Non-Ferrous Materials


CNGA 2MT (CBN)
Negative 80° Rhombic Inserts with 2 CBN Mini Tips and Flat Rake Angle for Hardened Steel and Cast Iron


CNGA 2MT MM (CBN)
Negative 80° Rhombic Inserts with 2 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron


CNGA 4MT (CBN)
Negative 80° Rhombic Inserts with 4 CBN Mini Tips and Flat Rake Angle for Hardened Steel and Cast Iron


CNGA 4MT MM (CBN)
Negative 80° Rhombic Inserts with 4 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron


CNGA MT (CBN)
Negative 80° Rhombic Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron


CNGA MT (PCD)
Negative 80° Rhombic Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials


CNGA W-2MT (CBN)
Negative 80° Rhombic Inserts with 2 CBN Wiper and Mini Tip for Hardened Steel and Cast Iron


CNGA W-MT (CBN)
Negative 80° Rhombic Inserts with a Single CBN Wiper with a Mini Tip for Hardened Steel and Cast Iron


CNGA W-MT (PCD)
Negative 80° Rhombic Inserts with a Single CBN Wiper and Mini Tip for Finishing Non-Ferrous Materials


CNGG (CER)
Negative 80° Rhombic Ground Ceramic Inserts with a Chipbreaker for Machining Hardened Steel and Cast Iron

Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved