ISCAR Cutting Tools - Metal Working Tools - Milling - Plunging & Recessing

Customized Items ×

Choose an item to customize and generate a quotation

FF EW-M : FEEDMILL, fast feed endmills with FLEXFIT threaded adaptation, using FF WOMT... inserts. Can run at very high feed rates of up to 1.5 mm/tooth at small DOC, resulting in very high metal removal rates.(-)Fast Feed Endmills with FLEXFIT Threaded Adaptation(+)

Representative Image

Designation	DCX	DC	AE	CICT	APMX	THSZMS	LF	OAL	RMPX°		MIID	TQ_3		IC	HAND	KAPR	NOF	CCMS	CSP	DCONMS	ZEFF	GICAT
FF EW D25-M12-06-C	25.00	11.00	7.0~	2	1.20	M12	25.00	47.00	5.0	2.0	FF WOMT0602	33	0.06	9.86~	R~	13.0~	2~	SAI02C0120$$$$~	1~	-~	2~	3103444
FF EW D32-M16-06-C	32.00	18.00	7.0~	3	1.20	M16	35.00	60.00	4.0	2.0	FF WOMT0602	40	0.16	9.86~	R~	13.0~	3~	SAI02C0160$$$$~	1~	-~	3~	3103445
FF EW D40-M16-06-C	40.00	26.00	7.0~	4	1.20	M16	40.00	65.00	2.5	2.0	FF WOMT0602	40	0.23	9.86~	R~	13.0~	4~	SAI02C0160$$$$~	1~	-~	4~	3103614

For adaptation, click on "More Info"
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter

Milling
Main Application

Plunging & Recessing
Sub Application

Site Map

Milling Main Application

Plunging & Recessing Sub Application

Site Map

Milling
Main Application

Plunging & Recessing
Sub Application