ISCAR Cutting Tools - Metal Working Tools - Milling - Slitting

Customized Items ×

Choose an item to customize and generate a quotation

GM-DG : Slitting cutters carrying self-clamped inserts. When used with GIM or GIMY single ended inserts, cutting depth is not limited. GIP and GIF double-ended inserts can be used for DOC less than 12mm, GIPA inserts for aluminum.(-)Slitting Cutters Carrying Self-Clamped Inserts(+)

Representative Image

Designation	CWN	CWX	DC	CICT	DCONMS	THUB	CDX	RPMX	a°	HAND	CW	MIID	KAPR	CCMS	CSP	DHUB	ZEFF	GICAT	GIREM
GM D100-3DG-22K	2.70	3.35	100.00	6	22.00	2.40	29.00	800	90	R~	3.00~	GIP 3.00E-0.40	90.0~	FDA01G2200H$07~	0~	~	6~	2301722
GM D125-3DG-32K	2.70	3.35	125.00	8	32.00	2.40	34.00	640	-	R~	3.00~	GIP 3.00	90.0~	FDA01G3200H$07~	0~	~	8~	2301681	Only one key slot
GM D160-3DG-32K	2.70	3.35	160.00	10	32.00	2.40	39.00	500	90	R~	3.00~	GIP 3.00E-0.40	90.0~	FDA01G3200H$07~	0~	~	10~	2301727
GM D200-3DG-40K	2.70	3.35	200.00	14	40.00	2.40	59.00	400	90	R~	3.00~	GIP 3.00E-0.40	90.0~	FDA01G4000H$07~	0~	~	14~	2301728
GM D100-4DG-22K	3.36	4.35	100.00	6	22.00	3.20	29.00	800	90	R~	4.00~	GIP 4.00-0.80	90.0~	FDA01G2200H$07~	0~	~	6~	2301723
GM D125-4DG-32K	3.36	4.35	125.00	8	32.00	3.20	34.00	640	-	R~	4.00~	GIP 4.00E-0.40	90.0~	FDA01G3200H$07~	0~	~	8~	2301724	Only one key slot
GM D200-4DG-40K	3.36	4.35	200.00	14	40.00	3.20	59.00	400	90	R~	4.00~	GIP 4.00	90.0~	FDA01G4000H$07~	0~	~	14~	2301729

DHUB refers to SW/S drive shanks and R drive flange set
Maximum RPM may not be exceeded.

Milling
Main Application

Slitting
Sub Application

Site Map

Milling Main Application

Slitting Sub Application

Site Map

Milling
Main Application

Slitting
Sub Application