Customized Items ×
Choose an item to customize and generate a quotation
     
ST-SRK : Thermal chuck collets with straight shanks. To be used for carbide tools only(-)Thermal Chuck Collets with Cylindrical Shanks(+)
Representative Image
 
Representative Image
 
 RUNOUT (INT) 0.003MM(.00012  HARDNESS 50-52  SURFACE FINISH N5  SHRINKIN  COOLANT THROUGH TOOL
Related solid tools for : ST-SRK :


SCDT
Pre-Thread Solid Carbide Drills with Coolant Holes


SCD-ACP5N (5xD)
DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD


SCD-ACP8N (8xD)
Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD


SCCD-ACP3
Three Flute Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD


SCCD-ACP5
Three Flute Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD


SCD-SXC30
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 30xD


SCD-SXC40
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 40xD


SCD-SXC50
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 50xD


SCD-ACP3FL (3XD)
Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD (Available in North America Only)


SCD-ACP5FL (5XD)
Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD (Available in North America Only)


SCD-SXC16
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 16xD


SCD-SXC20
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 20xD


SCCD-ACF3
Three Flute Solid Carbide Flat Head Drills with Coolant Holes, Drilling Depth 3xD


SCCD-ACF5
Three Flute Solid Carbide Flat Head Drills with Coolant Holes, Drilling Depth 5xD


ER-S4 R
4 Flutes Corner Rounding Solid Carbide Endmills


SCD-ACP8FL (8XD)
Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD (Available in North America Only)


EC-E4 (CER)
Solid Ceramic Endmills with 4 Flutes for Machining Nickel-Based Alloy Materials


EC-E6 (CER)
Solid Ceramic Endmills with 6 Flutes for Machining Nickel-Based Alloy Materials


SCD-IXC16
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 16xD, for Machining ISO K Materials


SCD-IXC20
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 20xD, for Machining ISO K Materials


SCD-IXC30
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 30xD, for Machining ISO K Materials


EC/ECC-A-2
2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills


EB-A-4 (medium length)
4 Flute, 30° Helix Medium Length Solid Carbide Ball Nose Endmills


EBL-A-4
4 Flute, 30° Helix Long Solid Carbide Ball Nose Endmills


ECL-B-4/6
4 & 6 Flute, 45° Helix Long Solid Carbide Endmills


EC-E-3
3 Flute, 38° Helix Medium Length Solid Carbide Endmills


EC-A-4/4R
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Various Radii


EC-B-4/4R
4 Flute, 45° Helix Medium Length Solid Carbide Endmills


ECC-E-3
3 Flute, 38° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners


ECC-A-4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners


EB-A-2
2 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills


EB-A-4 (short length)
4 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills


ECXL-B-4/6
4 & 6 Flute, 45° Helix Extra Long Solid Carbide Endmills


ECH-B-6
6 Flute, 45° Helix Medium Length Solid Carbide Endmills for Finishing Hard Materials up to 65 HRC


ECA-B-2
2 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum


ERF-A/E-3,4,6
3, 4, and 6 Flute, 30° and 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Neck for Alloy Steel


ERC-E-3
3 Flute, 38° Helix Medium Length Solid Carbide Roughing Endmills with 3xD Relieved Necks for Machining Aluminum


EB-A-3
3 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills


ECA-F-2
2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum


EBM-A-2
2 Flute, 30° Helix Medium Length Solid Carbide Miniature Ball Nose Endmills


EC-D6
6 Flute, 50° Helix Medium Length Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC


MTECS-ISO
Small Diameter Solid Carbide Threading Endmills for an Internal ISO Profile


ECF../45
45° Chamfering and Countersinking Solid Carbide Endmills


ECR-B-X/L/M/S
4-7 Flute, 45° Helix with Different Length Solid Carbide Roughing Endmills


MTEC-ISO
Solid Carbide Internal Threading Endmills for ISO Thread Profile


MTEC-W
Solid Carbide Threading Endmills for Internal or External BSF/BSP Thread Profiles


MTEC-UN
Solid Carbide Threading Endmills for Internal UN Thread Profile


MTEC-BSPT
Solid Carbide Threading Endmills for an External or Internal BSPT Thread Profile


MTEC-NPT
Solid Carbide Threading Endmills for an External or Internal NPT Thread Profile


MTEC-NPTF
Solid Carbide Threading Endmills for an External or Internal NPTF Thread Profile


ECR-B3-R
3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks for High Stock Removal Rates of Aluminum


ECA-B-3
3 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum


ECR-T-M
4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills for High Stock Removal Rates


SCD-AP4 (4xD)
DIN 6537 Solid Carbide Drills without Coolant Holes, Drilling Depth 4xD


EB-A2 (rib processing)
2 Flute, 30° Helix Rib Processing Solid Carbide Ball Nose Endmills for Materials up to 55 HRC


EBT-T4
4 Flute, 25° Helix Solid Carbide Tapered Ball Nose, for Rib Processing on Hardened Steel


EBRF-T
3, 4 Flute, 20° Helix Long Solid Carbide Ball Nose Endmills for Roughing Materials up to 55 HRC


EC-A2-M (rib processing)
2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing on Hard Materials up to 55 HRC


EC-A3/E3 (economical-short/medium)
Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Short/Mediun Length Solid Carbide Endmills


EC-A4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills for Hard Materials up to 65 HRC


EC-B3 (economical-short/medium)
Economical Type 3 Flute, 45° Helix, Center Cutting, Short/Medium Length Solid Carbide Endmills


EC-B4-R
4 Flute, 45° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii for Hardened Steel


ECT-A2
2 Flute, 30° Tapered Helix Solid Carbide Endmills, for Hardened Steel


ECT-T4
4 Flute, 25° Tapered Helix Solid Carbide Endmills, for Rib Processing on Hardened Steel


ESB-A2
2 Flute, 30° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRC


ESB-A4
4 Flute, 30° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRC


MTECS-UN
Small Diameter Solid Carbide UN Profile Threading Endmills for Steel


EC-A2 (medium length)
2 Flute, 30° Helix Medium Length Solid Carbide Endmills for Hard Materials up to 65 HRC


EC-B6
6 Flute, 45° Helix Extra Long Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC


EC-A4(economical-medium & extra long)
Economical Type 4 Flute, 30° Helix, Center Cutting, Medium & Extra Long Solid Carbide Endmills


EFS-B44
Combination of Roughing and Finishing Solid Carbide Endmills with a Single Tool


EB-A4 (economical-short)
Economical Type 4 Flute, 30° Helix Ball Nose Short Solid Carbide Endmills


EB-A2 (stub cut length)
2 Flute, 30° Helix Stub Cut Length Ball Nose Solid Carbide Endmills for Materials up to 55-70 HRC


EB-A2 (tapered flute & neck)
2 Tapered Flutes, 30° Helix Solid Carbide Ball Nose Endmills with Relieved Necks for Materials up to 65 HRC


MTECB-ISO
Solid Carbide Internal Threading Endmills with Coolant Hole for ISO Thread Profile


MTECB-UN
Solid Carbide Threading Endmills with Coolant Hole for Internal UN Thread Profile


MTECB-NPT
Solid Carbide Threading Endmills with Coolant Hole for an External or Internal NPT Thread Profile


MTECB-W
Solid Carbide Internal or External Threading Endmills with Coolant Hole for BSF/BSP Thread Profiles


EB-A2 (economical)
Economical Type 2 Flute, 30° Helix Ball Nose Solid Carbide Endmills


SCD-AP6 (6xD)
DIN 6537 Solid Carbide Drills without Coolant Holes, Drilling Depth 6xD


ECP-E3L
3 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges


ECP-E4L
4 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges


ETR-A2
2 Flute Toroidal Endmills


ECR-B-MF
4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRC


SCD-AH5 (5xD)
Solid Carbide Drills for Hard Materials, Drilling Depth 5xD


MTECSH-ISO
Small Diameter Short Left-Hand Cut. Internal ISO Profile Threading Endmills for Hardened Steel


MTECSH-UN
Small Diameter Short Left-Hand Cut Solid Carbide UN Profile Threading Endmills for Hardened Steel


MTEC E-ISO
Solid Carbide External Threading Endmills for an ISO Thread Profile


MTEC E-UN
Solid Carbide Threading Endmills with UN Form for External Threading


EC-E4L-CF
4 Flute, 38° Helix Endmills with 3xD Relieved Neck and Variable Pitch for Chatter Dampening


EC-E5L-CF
5 Flute, 38° Helix Medium Length (2.5xD) Variable Pitch Endmills


MTECZ-ISO
Solid Carbide Internal Threading Endmills with Coolant Holes


MTECZ-BSF/BSP
Solid Carbide Threading Endmills with Coolant Holes for Internal or External BSF/BSP Thread


MTECZ-UN
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal UN Thread Profiles


EB-A2 (long with neck)
2 Flute, 30° Helix Long Solid Carbide Ball Nose Endmills with Relieved Necks for Materials up to 65 HRC


EB-A2 (extra long)
2 Flute, 30° Helix Extra Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRC


EB-A2 (precision stub cut)
2 Flute, 30° Helix Stub Cut Length High Precision Ball Nose Endmills with Relieved Necks for Materials up to 65 HRC


MTECS-MJ
Small Diameter Short Solid Carbide MJ-Type Profile Threading Endmills


MTECS-UNJ
Small Diameter Short Solid Carbide UNJ-Type Profile Threading Endmills


MTECI-A60
60° Partial Profile Solid Carbide Thread Mills for Internal and External Threads


EFF-S2/S4/S6
Solid Carbide Endmills with Relieved Necks for Fast Feed High Productivity


EC-A2 (economical-short/medium/extra long)
Economical Type 2 Flute, 30° Helix Center Cutting, Short/Medium/Extra Long Length Solid Carbide Endmills


EFS-E44
Combination of Roughing and Finishing Solid Carbide Endmills with Variable Pitch for CHATTERFREE Milling


ECA-H3-CF
Solid Carbide Endmills with Different Helix, Variable Pitch, and Relieved Neck for Machining Aluminum


SCD-AP5 (5xD)
Solid Carbide Drills without Coolant Holes, Drilling Depth 5xD


MTECQ-ISO
Endmills with Through Tool Coolant and Reduced Neck Diameter for Deep Internal ISO Profile Threading


EC-H4-L/M/XL-CFR
4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening with Assorted Radii


EFP-E4,5CF
Solid Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Front Edge


MTECS-W
Short Solid Carbide Threading Endmills for Internal or External BSP and BSF Thread Profiles


EC-H5M-CFR
5 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening with Assorted Radii


ECA-H4-CF
Solid Carbide Endmills with Different Helix and Long Neck Relief for Machining Aluminum


ECAP-H3-CF
Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters, and Coolant Holes for Machining Aluminum


MTECD-ISO
Small Diameter Short Left-Hand Cut. Solid Carbide Endmills for Internal ISO Profile Drilling, Threading and Chamfering.


MTECD-UN
Small Diameter, Short, Left Hand, Internal UN Profile Endmills for Drilling, Threading and Chamfering


EPN-F
Solid Endmills with a Special Edge Configuration for Machining Different Types of Composite Materials


EPX
Solid Carbide Endmills with Right-and Left-Hand Helix Flutes Enables Changing Direction at Mid Cutting Height


EC-E7/H7-CF
7 Flute Endmills with Different Helix and Variable Pitch for CHATTERFREE High Speed Finish Milling


EC-H-CF
6-20 Flute Endmills with Different Helix and Variable Pitch for CHATTERFREE High Speed Finish Milling


ECD-S2
Chamfering and Spot Drilling Solid Carbide Tools


ECK-H4M-CFR
Endmills with Different Helix, Chamfered Edges and Variable Pitch for Chatter Dampening on Titanium


EB-E4L-CF
4 Flute, 45° Helix Ball Nose Endmills with 3xD Relieved Necks and Variable Pitch for Chatter Dampening on Hard Materials


EPNC
Solid Carbide Endmill with Special Cutting Edges, for Machining Different Types of Composite Materials


EPND
Solid Carbide Endmills with Special Cutting Edges, also for Drill Mill Applications


EB-A2-H (rib processing)
2 Flute, 30° Helix Rib Processing Solid Carbide Ball Nose Endmills for Materials up to 65 HRC


EC-A2-R/H (rib processing)
2 Flute, 30° Helix and Corner Radii Solid Carbide Endmills for Rib Processing on Hard Materials up to 65 HRC


EC-B6-H
6 Flute, 45° Helix Extra Long Solid Carbide Endmills for Finishing Hard Materials up to 65 HRC


EC-H4S-CF
Short 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening


ECR-B3-R-C
3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Coolant Channels for Aluminum


EB-H-CF
3/5 Flute Solid Carbide Ball Nose Endmills with Different Helix and Variable Pitch for Materials up to 65 HRC


SCD-AP3N (3xD)
DIN 6537 Solid Carbide Drills without Coolant Holes, Drilling Depth 3xD


SCD-AP5N (5xD)
DIN 6537 Solid Carbide Drills without Coolant Holes, Drilling Depth 5xD


SCD-ACP3N (3XD)
DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD


EBA-B2
2 Flute High Precision Solid Carbide Ball Nose Endmills for Machining Aluminum


ECP-H7-CF
7 Flute Solid Carbide Endmills with Different Helix, Variable Pitch and Chip Splitting Cutting Edges


ECY-S5-CFR
5 Flute Endmills with Different Helix for Milling Austenitic, Duplex, Cast and Precipitation Hardening Stainless Steels


ELB
Solid Carbide Lens-Shaped (Barrel) Endmills for 3D Profiling


EOB
Solid Carbide Oval-Shaped (Barrel) Endmills for 3D Profiling


SCD-FNPCD
Solid Carbide Drills with PCD Full Nib Insert for Composite Materials (CFRP) and Stack Machining


ETB
Solid Carbide Taper-Shaped (Barrel) Endmills for 3D Profiling


SCD-WPCD
Solid Carbide Drills with PCD Insert for Composite Materials (CFRP) and Stack Machining


SCD-CVD
Solid Carbide Drills with CVD Coating for Composite Materials (CFRP) and Stack Machining


EC-E4M-CF
4 Flute, 38° Helix Endmills, up to 2XD depth of cut with Variable Pitch for Chatter Dampening

Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved