ISCAR Cutting Tools - Metal Working Tools - Milling - Slotting

HCE-MM : BALLPLUS, multifunction endmills with a MULTI-MASTER threaded adaptation that can carry ball nose, 90° and toroidal inserts.(-)Multifunction Endmills with a MULTI-MASTER Threaded Adaptation that Can Carry Several Insert Geometries(+)

Designation	DC	DC_2	OAL	OAL_2	LF	APMX	THSZMS	DCONMS	DRVS			HAND	Insert	S5	Pocket	MIID	MIID_2	CNSC	CXSC	ISYC	ISYC_2	ISCTMP	ISCTMP_2	ClssID	ClssID_2	GTC	GTC_2	KAPR	KAPR_2	APMX_2	NOF	ZADJ	BMC	CCTMS	CCFMS	CCMS	S1	S2	CICT	CSP	CUBPMS	CZCMS	LF_2	RMPX°	RMPX°_2	RPMX	SPI	TCDCONMS	UST	ZEFF	ZEFP	ZNP	GICAT
HCE D12/.50-MMT08	12.00	-~	28.00	28.00~	20.00	8.10	T08	11.50	10.0	15.0	0.01	R~	HCC\HTR~	1~	HCC\HTR~	HCC D120-R0.5-QF	-~	0~	0~	307-01~	-~	GEMLT010110~	-~	71E01A05D27A8~	-~	MILBNSI~	-~	90.0~	-~	-~	2~	0~	S~	SAI~	01~	SAI01C0080$$$$~	1~	2~	1~	0~	C~	0080~	-~	90.0~	~	~	~	$$$$~	C~	2~	2~	0~	3104310
HCE D16/.62-MMT10	16.00	16.00~	36.75	36.75~	25.00	10.30	T10	15.20	13.0	28.0	0.03	R~	HCC\HTR~	2~	HCC\HTR~	HCC D160-R1.0-QF	HTR D160-R1.0-QF~	0~	0~	307-01~	307-03~	GEMLT010110~	GEMLT120110~	71E01A05D27A8~	71E01A05D27A8~	MILBNSI~	MILBNSI~	90.0~	97.0~	5.00~	2~	0~	S~	SAI~	01~	SAI01C0100$$$$~	1~	2~	1~	0~	C~	0100~	25.00~	90.0~	~	~	~	$$$$~	C~	2~	2~	0~	3103927
HCE D20/.75-MMT12	20.00	20.00~	48.80	48.80~	35.00	12.80	T12	18.50	15.0	28.0	0.06	R~	HCC\HTR~	3~	HCC\HTR~	HCC D200-R0.5-QF	HTR D200-R1.0-QF~	0~	0~	307-01~	307-03~	GEMLT010110~	GEMLT120110~	71E01A05D27A8~	71E01A05D27A8~	MILBNSI~	MILBNSI~	90.0~	97.0~	0.46~	2~	0~	S~	SAI~	01~	SAI01C0120$$$$~	1~	2~	1~	0~	C~	0120~	35.00~	90.0~	~	~	~	$$$$~	C~	2~	2~	0~	3104224

For undercutting, use HTR inserts only
The dimensions are for HCC inserts with re=0.5 mm
Do not apply lubricant to the MULTI-MASTER threaded connection

TECHKNOW

Milling
Main Application

Slotting
Sub Application

Site Map

TECHKNOW

Milling Main Application

Slotting Sub Application

Site Map

Milling
Main Application

Slotting
Sub Application