Customized Items ×
Choose an item to customize and generate a quotation
     
HSK A63WH-MULNR-J12MWX2 : MULTI-WEDGE lock, twin toolholders with HSK taper shanks for negative 80° rhombic, trigon and square inserts. Can be used on turn-mill machines.(-)MULTI-WEDGE Twin Toolholders with HSK Taper Shanks for 80° Rhombic, Trigon and Square Inserts(+)
Representative Image
Right-hand shown
 
Representative Image
Right-hand shown
 
 MULNR/L-J12MWX2  COOLANT THROUGH TOOL
Related inserts for : HSK A63WH-MULNR-J12MWX2 :


WNMG-CERMET
Double-Sided Trigon Cermet Grade Inserts for Semi-Finishing and Finishing Applications


WNMG-F3S
Double-Sided 80° Trigon Inserts for Titanium and Heat Resistant Materials Finishing Applications


WNGA (CBN)
Negative 80° Trigon Inserts with a Single CBN Tip and Flat Rake Angle for Hardened Steel and Cast Iron


WNGA (PCD)
Negative 80° Trigon Inserts with a Single PCD Tip and Flat Rake Angle for Finishing Non-Ferrous Materials


WNMG-F3P
Double-Sided Trigon Inserts for Semi-Finishing and Finishing Applications


WNMG-M3P
Double-Sided Trigon Inserts for Medium Machining Conditions on Steel


WNMG-F3M
Double-Sided Trigon Inserts for Stainless Steel Finishing Applications


WNMG-M3M
Double-Sided Trigon Inserts for Machining Stainless and Low Carbon Steel


WNMG-TF
Double-Sided Trigon Inserts for Machining a Wide Range of Materials under Medium Cutting Conditions


WNMG-GN
Double-Sided Trigon Inserts for General Applications


WNMG-NR
Double-Sided Trigon Inserts with a Special Chipformer for Heavy Machining


WNMG-PP
Double-Sided Trigon Inserts for Machining Very Ductile Materials under Medium Cutting Conditions


WNMG-VL
Double-Sided Trigon Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves


WNMG-TNM
Double-Sided Trigon Inserts for Semi-Roughing and Roughing Applications


WNMG-NF
Double-Sided Trigon Inserts for Semi-Finishing and Finishing Applications


WNMZ-RF/LF
Double-Sided Trigon Inserts with a Ground Chipformer for Finishing Applications


WNMM-NM
Single-Sided Trigon Inserts for Roughing Applications


WNMG-WF
Double-Sided Trigon Wiper Inserts for Finishing Operations at High Feeds


WNMA/WNMA-WG
Double-Sided Trigon Inserts for Short Chipping Materials such as Cast Iron


WNMG-WG
Double-Sided Trigon Wiper Inserts for High Surface Finish at High Feed Turning


WNGA (CER)
Negative 80° Trigon Double-Sided Ceramic Inserts for Machining Cast Iron, Hardened Steel and Heat-Resistant Alloys


WNGA-MC/M6 (CBN)
Multi-Cornered CBN Inserts for Machining Hardened Steel


WNGA-M3 (CBN)
Multi-Cornered CBN Inserts for Machining Hardened Steel

Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved