ISCAR Cutting Tools - Metal Working Tools - Milling - Plunging & Recessing

Customized Items ×

Choose an item to customize and generate a quotation

ERW-M : MILLSHRED - Endmills with FLEXFIT threaded adaptation carrying round inserts with serrated cutting edges or regular round inserts. Used for rough machining applications on small dies and low power machines.(-)Rough Profiling Tools with a FLEXFIT Adaptation(+)

Designation	Ord	DCX	DC	IC	APMX	CICT	DCONMS	OAL	LF	DRVS	THSZMS	RMPX°		TQ_3		HAND	MIID	RE	CNSC	CXSC	ISYC	ISCTMP	ClssID	BMC	CCFMS	CCMS	CCTMS	ZADJ	ZNP	GTC	BD	CSP	CUBPMS	CZCMS	IIC	TCDCONMS	UST	ZEFF	ZEFP	GICAT
ERW D015A025-3-M12-10	2~	25.00	15.00	10.00	5.00	3	21.00	52.00	30.00	17.0	M12	3.0	Y~	33	0.06	R~	RCCT 1004MO	5.00~	1~	3~	307-05~	GEMLT090100~	71E01A05D27A8~	S~	02~	SAI02C0120$$$$~	SAI~	0~	3~	MILPRQCI~	0.00~	1~	C~	0120~	IS$$67775103187297~	$$$$~	C~	3~	3~	3106280
ERW D022A032-4-M16-10	4~	32.00	22.00	10.00	5.00	4	29.00	55.00	30.00	25.0	M16	4.0	Y~	40	0.12	R~	RCCT 1004MO	5.00~	1~	3~	307-05~	GEMLT090100~	71E01A05D27A8~	S~	02~	SAI02C0160$$$$~	SAI~	0~	4~	MILPRQCI~	0.00~	1~	C~	0160~	IS$$67775103187297~	$$$$~	C~	4~	4~	3106282
ERW D013A025-2-M12-12	8~	25.00	13.00	12.00	6.00	2	21.00	57.00	35.00	17.0	M12	2.0	Y~	33	0.08	R~	RCCT 1206MO	6.00~	1~	3~	307-05~	GEMLT090100~	71E01A05D27A8~	S~	02~	SAI02C0120$$$$~	SAI~	0~	2~	MILPRQCI~	0.00~	1~	C~	0120~	IS$$212329149384285~	$$$$~	C~	2~	2~	3105229
ERW D020A032-3-M16-12	10~	32.00	20.00	12.00	6.00	3	29.00	65.00	40.00	25.0	M16	7.0	Y~	40	0.15	R~	RCCT 1206MO	6.00~	1~	3~	307-05~	GEMLT090100~	71E01A05D27A8~	S~	02~	SAI02C0160$$$$~	SAI~	0~	3~	MILPRQCI~	0.00~	1~	C~	0160~	IS$$212329149384285~	$$$$~	C~	3~	3~	3104906
ERW D028A040-4-M16-12	12~	40.00	28.00	12.00	6.00	4	29.00	65.00	40.00	25.0	M16	5.0	Y~	40	0.19	R~	RCCT 1206MO	6.00~	1~	3~	307-05~	GEMLT090100~	71E01A05D27A8~	S~	02~	SAI02C0160$$$$~	SAI~	0~	4~	MILPRQCI~	0.00~	1~	C~	0160~	IS$$212329149384285~	$$$$~	C~	4~	4~	3105014

For adaptation, click on "More Info".
When mounting items with FLEXFIT threaded adaptation, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter

Milling
Main Application

Plunging & Recessing
Sub Application

Site Map

Milling Main Application

Plunging & Recessing Sub Application

Site Map

Milling
Main Application

Plunging & Recessing
Sub Application