ISCAR Cutting Tools - Metal Working Tools - Hole Making - Drilling

BT-HYDRO : Hydraulic chucks with MAS-BT form AD shanks.(-)Hydraulic Chucks with MAS-BT Form AD Shanks(+)

Related holders for : SCD 145-045-160 AP3

Designation	SS	CSI	DCONMS	DCONWS	BTED	BD	BD_2	LPR	LBX	LB	L min	ADJRGA	LSCWS	THID	CRKS	OAL		CCTMS	S. Std.	Shank	Mod	UST	Xs (LTA)	BMC	DF		CSP	CZCMS	CCFWS	ISYC	CCFMS	CCTWS	LS	ISCTMP	BSC	CCFWS_2	CCMS	CCTWS_2	CCWS	CCWS_2	ClssID	CMCS	CNSC	CUBPMS	CUBPWS	CUBPWS_2	CXSC	CZCWS	CZCWS_2	GTC	GTC_2	HTA	LTA	TCDCNWS2	TCDCONMS	TCDCONWS	WTA	GICAT
BT30 HYDRO 16X90	30	16~	30.00~	16.00	34.00	38.00	50.00	90.00	63.0	47.50	42.0~	10.00	52.0	M12X1	M12	138.40~	1.00	SKG~	BT~	C~	002~	M~	90.00~	S~	46.00~	Y~	1~	0300~	01~	401-01~	51~	HYD~	48.4~	BT-HYDRO~	0~	01~	SKG51C0300$$$$~	ZYL~	HYD01G1600h$06~	ZYL01G1600h$06~	71EAD3871D313~	05~	1~	C~	G~	G~	1~	1600~	1600~	ADPRS_MSKG51_WHYD01~	ADPRS_MSKG51_WZYL01~	~	90.00~	h6~	$$$$~	h6~	~	4559243
BT40 HYDRO 16X90	40	16~	40.00~	16.00	34.00	38.00	50.00	90.00	63.0	47.50	42.0~	10.00	52.0	M12X1	M16	155.40~	1.51	SKG~	BT~	C~	002~	M~	90.00~	S~	63.00~	Y~	1~	0400~	01~	401-01~	51~	HYD~	65.4~	BT-HYDRO~	0~	01~	SKG51C0400$$$$~	ZYL~	HYD01G1600h$06~	ZYL01G1600h$06~	71EAD3871D313~	05~	1~	C~	G~	G~	1~	1600~	1600~	ADPRS_MSKG51_WHYD01~	ADPRS_MSKG51_WZYL01~	~	90.00~	h6~	$$$$~	h6~	~	4559251
BT50 HYDRO 16X110	50	16~	50.00~	16.00	34.00	38.00	80.00	110.00	72.0	45.00	42.0~	10.00	52.0	M12X1	M24	211.80~	4.80	SKG~	BT~	C~	002~	M~	110.00~	S~	100.00~	Y~	1~	0500~	01~	401-01~	51~	HYD~	101.8~	BT-HYDRO~	0~	01~	SKG51C0500$$$$~	ZYL~	HYD01G1600h$06~	ZYL01G1600h$06~	71EAD3871D313~	05~	1~	C~	G~	G~	1~	1600~	1600~	ADPRS_MSKG51_WHYD01~	ADPRS_MSKG51_WZYL01~	~	110.00~	h6~	$$$$~	h6~	~	4559261

Chucking forces will be reduced by 25% if reduction sleeves are used.
Note: Reduction sleeves are available for 12, 20, 25 and 32 mm bore diameters (ordered separately).
The coolant passages in the B type flange are blocked with screws which can be removed when required.

TECHKNOW

Hole Making
Main Application

Drilling
Sub Application

Site Map

TECHKNOW

Hole Making Main Application

Drilling Sub Application

Site Map

Hole Making
Main Application

Drilling
Sub Application