ISCAR Cutting Tools - Metal Working Tools - Hole Making - Drilling

HSK A-HYDRO (long) : Long projection hydraulic chucks with HSK DIN69893 form A tapered shanks.(-)Long Projection Hydraulic Chucks with HSK DIN69893 Form A Tapered Shanks(+)

Related holders for : SCD 145-045-160 AP3

Designation	DCONMS	DCONWS	SS	CSI	BTED	BD	BD_2	LPR	LBX	LB	L min	ADJRGA	LSCWS	THID	OAL		Shank	Mod	UST	Xs (LTA)	BMC		CSP	ISCTMP	BSC	CCFMS	CCFWS	CCFWS_2	CCMS	CCTMS	CCTWS	CCTWS_2	CCWS	CCWS_2	CDI	ClssID	ClssID_2	CMCS	CNSC	CUBPMS	CUBPWS	CUBPWS_2	CXSC	CZCMS	CZCWS	CZCWS_2	GTC	GTC_2	HTA	ISCTMP_2	ISYC	ISYC_2	LTA	S. Std.	TCDCNWS2	TCDCONMS	TCDCONWS	WTA	GICAT
HSK A63 HYDRO 16X150	63.00	16.00	63~	16~	34.00	38.00	50.00	150.00	124.0	106.50	42.0~	10.00	52.0	M12X1	182.00~	1.74	C~	002~	M~	150.00~	S~	Y~	1~	-~	0~	01~	01~	01~	HSK01C0630$$$$~	HSK~	HYD~	ZYL~	HYD01G1600-~	ZYL01G1600h$06~	1	-~	71EAD3871D313~	05~	1~	C~	G~	G~	1~	0630~	1600~	1600~	-~	ADPRS_MHSK01_WZYL01~	~	HSK-Cylindrical~	401-01~	~	150.00~	HSK A~	h6~	$$$$~	-~	0.00~	4559314
HSK A63 HYDRO 16X200	63.00	16.00	63~	16~	34.00	38.00	50.00	200.00	174.0	156.50	42.0~	10.00	52.0	M12X1	232.00~	2.17	C~	002~	M~	200.00~	S~	Y~	1~	-~	0~	01~	01~	01~	HSK01C0630$$$$~	HSK~	HYD~	ZYL~	HYD01G1600-~	ZYL01G1600h$06~	1	-~	71EAD3871D313~	05~	1~	C~	G~	G~	1~	0630~	1600~	1600~	-~	ADPRS_MHSK01_WZYL01~	~	HSK-Cylindrical~	401-01~	~	200.00~	HSK A~	h6~	$$$$~	-~	0.00~	4559315
HSK A100 HYDRO 16X150	100.00	16.00	100~	16~	38.00	38.00	63.00	150.00	121.0	97.50	42.0~	10.00	52.0	M12X1	200.00~	3.15	C~	002~	M~	150.00~	S~	Y~	1~	-~	0~	01~	01~	01~	HSK01C1000$$$$~	HSK~	HYD~	ZYL~	HYD01G1600-~	ZYL01G1600h$06~	1	-~	71EAD3871D313~	05~	1~	C~	G~	G~	1~	1000~	1600~	1600~	-~	ADPRS_MHSK01_WZYL01~	~	HSK-Cylindrical~	401-01~	~	150.00~	HSK A~	h6~	$$$$~	-~	0.00~	4559332
HSK A100 HYDRO 16X200	100.00	16.00	100~	16~	38.00	38.00	63.00	200.00	171.0	147.50	42.0~	10.00	52.0	M12X1	250.00~	3.73	C~	002~	M~	200.00~	S~	Y~	1~	-~	0~	01~	01~	01~	HSK01C1000$$$$~	HSK~	HYD~	ZYL~	HYD01G1600-~	ZYL01G1600h$06~	1	-~	71EAD3871D313~	05~	1~	C~	G~	G~	1~	1000~	1600~	1600~	-~	ADPRS_MHSK01_WZYL01~	~	HSK-Cylindrical~	401-01~	~	200.00~	HSK A~	h6~	$$$$~	-~	0.00~	4559333

Chucking forces will be reduced by 25% if reduction sleeves are used.
A cooling tube must be used with coolant through HSK spindles (ordered separately).
Reduction sleeves are available for 12, 20, 25 and 32 mm bore diameters (must be ordered separately).

TECHKNOW

Hole Making
Main Application

Drilling
Sub Application

Site Map

TECHKNOW

Hole Making Main Application

Drilling Sub Application

Site Map

Hole Making
Main Application

Drilling
Sub Application