ISCAR Cutting Tools - Metal Working Tools - ISO-Turning -

Customized Items ×

Choose an item to customize and generate a quotation

PCLNR/L-X-JHP-MC : Lever lock tools with bottom inlets for high-pressure coolant channels carrying CNMX/CNMG 80° rhombic inserts. The tools were designed to be clamped in VDI and CAMFIX shanks with bottom coolant-fed toolholders.(-)Lever Lock Tools with Bottom Inlets for High-Pressure Coolant Channels Carrying CNMX/CNMG 80° Rhombic Inserts(+)

Representative Image

Related inserts for : PCLNR/L-X-JHP-MC :

CNGA 2MT MM (CBN)
Negative 80° Rhombic Inserts with 2 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron

CNGA MT (PCD)
Negative 80° Rhombic Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials

CNGA MT (CBN)
Negative 80° Rhombic Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron

CNGA (PCD)
Negative 80° Rhombic Inserts with Negative Relief Angle and Single PCD Tip for Finishing Non-Ferrous Materials

CNGA W-MT (CBN)
Negative 80° Rhombic Inserts with a Single CBN Wiper with a Mini Tip for Hardened Steel and Cast Iron

CNGA 4MT MM (CBN)
Negative 80° Rhombic Inserts with 4 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron

CNGG-J(CBN)
80° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel

CNGA-J(CBN)
Multi-Cornered CBN Inserts for Machining Hardened Steel

CNGA W-MT (PCD)
Negative 80° Rhombic Inserts with a Single CBN Wiper and Mini Tip for Finishing Non-Ferrous Materials

CNMG-R3P
Double-Sided 80° Rhombic Inserts with a Chipformer for Rough Machining

CNGA 2MT (CBN)
Negative 80° Rhombic Inserts with 2 CBN Mini Tips and Flat Rake Angle for Hardened Steel and Cast Iron

CNGG (CER)
Negative 80° Rhombic Ground Ceramic Inserts with a Chipbreaker for Machining Hardened Steel and Cast Iron

CNGA W-2MT (CBN)
Negative 80° Rhombic Inserts with 2 CBN Wiper and Mini Tip for Hardened Steel and Cast Iron

CNGA 4MT (CBN)
Negative 80° Rhombic Inserts with 4 CBN Mini Tips and Flat Rake Angle for Hardened Steel and Cast Iron

CNGA (CBN)
Negative 80° Rhombic Inserts with Negative Relief Angles and Single CBN Tip for Finishing Hardened Steel and Cast Iron

CNMG-F3S
Double-Sided 80° Rhombic Inserts for Titanium and Heat Resistant Materials for Finishing Applications

CNMG-F3P
Double-Sided 80° Rhombic Inserts for Semi-Finishing and Finishing Applications

CNMG-M3P
Double-Sided 80° Rhombic Inserts for Medium Machining Conditions on Steel

CNMM-R3P
Single-Sided 80° Rhombic Inserts for Rough Turning Applications on Steel

CNMG-CERMET
Double-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications

CNGG-F3N
Double-Sided Sharp Edged Positive and Polished Rake Inserts for Finishing Aluminum and Other Non-Ferrous Materials

CNMX-M3/4PW
Double-Sided 80° Rhombic Inserts with a High Helical Cutting Edge for High Metal Removal Rates

CNMM-M4PW
Very Positive Radial Insert with a Helical Cutting Edge and Positive Rake for Heavy Machining Applications

CNGX-M3N
Double-Sided Positive Rake Inserts with High Helical and Sharp Edge for Medium Machining Non-Ferrous Materials

CNMG-F3M
Double-sided 80° Rhombic Inserts for Stainless Steel Finishing Applications

CNMG-M3M
Double-Sided 80° Rhombic Inserts for Machining Stainless and Low Carbon Steel

CNMX-M3/4MW
Double-Sided 80° Rhombic Inserts with a High Helical Cutting Edge for High Metal Removal Rates on Stainless Steel

CNMG/CNGG-TF
Double-Sided 80° Rhombic Inserts for Machining a Wide Range of Materials under Medium Cutting Conditions

CNMG-GN
Double-Sided 80° Rhombic Inserts for General Applications

CNMG-NR
Double-Sided 80° Rhombic Inserts with a Special Chipformer for Heavy Machining

CNMG/CNGG-PP
Double-Sided 80° Rhombic Inserts for Machining Very Ductile Materials under Medium Cutting Conditions

CNMG-VL
Double-Sided 80° Rhombic Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves

CNMG/CNGG-SF
Double-Sided 80° Rhombic Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut

CNMG-NF
Double-Sided 80° Rhombic Inserts for Semi-Finishing and Finishing Applications

CNMM-NM
Single-Sided 80° Rhombic Inserts for Roughing Applications

CNMG-WF
Double-Sided 80° Rhombic Wiper Inserts for Finishing Operations at High Feeds

CNMG-WG/NRW
Double-Sided 80° Rhombic Wiper Inserts for High Feed Turning and High Surface Finish

CNMS-12
80° Rhombic Single-Sided Inserts for Soft and Nonferrous Materials

CNMA
Double-Sided 80° Rhombic Inserts for Short Chipping Materials such as Cast Iron

CNMG (CER)
80° Rhombic Double-Sided Inserts with a T-Land for Machining Cast Iron and Hardened Steel

CNGA (CER)
Negative 80° Rhombic Double-Sided Inserts for Machining Cast Iron, Hardened Steel, and Heat-Resistant Alloys

CNGA-4 (CBN)
4-Cornered CBN Inserts for Machining Hardened Steel

CNGA-2 (CBN)
80° Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys

CNMA-T/M1/WG (CBN)
80° Rhombic Inserts with a Single CBN Top Corner Tip for Machining Cast Iron, Hardened Steel and Super Alloys

CNGG-M4HF/M4HM (CBN)
80° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel

CNMA-MW4 (CBN)
80° Rhombic Inserts with 4 CBN Wiper Edge Tips for Machining Hardened Steel

CNMA (PCD)
80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications

ISO-Turning
Main Application

Site Map

ISO-Turning Main Application

Site Map

ISO-Turning
Main Application