ISCAR Cutting Tools - Metal Working Tools - Milling -

Customized Items ×

Choose an item to customize and generate a quotation

FFQ4 D-12 : Fast feed face mills carrying single-sided square Inserts with 4 cutting edges.(-)Fast Feed Face Mills Carrying Single-Sided Square Inserts with 4 Cutting Edges(+)

Representative Image

Designation	DC	DCX	APMX	AE	CICT	OAL	DHUB	DCONMS	Arbor	RMPX°	MDN	MDX	CSP	MIID		IC	HAND	KAPR	CCMS	GICAT
FFQ4 D040-3-16-12	18.00	40.00	1.50	10.0	3	45.00	38.00	16.00	A	4.3	58.00	79.00	1~	FFQ4 SOMT 120516HP	0.23	12.70~	R~	9.0~	FDA02G1600H$07~	3309042
FFQ4 D040-4-16-12	18.00	40.00	1.50	10.0	4	45.00	38.00	16.00	A	4.3	58.00	79.00	1~	FFQ4 SOMT 120516HP	0.22	12.70~	R~	9.0~	FDA02G1600H$07~	3107336
FFQ4 D050-4-22-12	28.00	50.00	1.50	10.0	4	50.00	48.00	22.00	A	2.7	78.00	99.00	1~	FFQ4 SOMT 120516HP	0.38	12.70~	R~	9.0~	FDA02G2200H$07~	3309041
FFQ4 D050-5-22-12	28.00	50.00	1.50	10.0	5	50.00	48.00	22.00	A	2.7	78.00	99.00	1~	FFQ4 SOMT 120516HP	0.37	12.70~	R~	9.0~	FDA02G2200H$07~	3107337
FFQ4 D052-5-22-12	29.00	52.00	1.50	10.0	5	50.00	48.00	22.00	A	2.5	81.00	103.00	1~	FFQ4 SOMT 120516HP	0.39	12.70~	R~	9.0~	FDA02G2200H$07~	3329567
FFQ4 D063-6-22-12	41.00	63.00	1.50	10.0	6	50.00	48.00	22.00	A	1.8	104.00	125.00	1~	FFQ4 SOMT 120516HP	0.50	12.70~	R~	9.0~	FDA02G2200H$07~	3107338
FFQ4 D066-6-27-12	43.00	66.00	1.50	10.0	6	50.00	60.00	27.00	A	1.6	109.00	131.00	1~	FFQ4 SOMT 120516HP	0.65	12.70~	R~	9.0~	FDA02G2700H$07~	3329630
FFQ4 D080-7-27-12	58.00	80.00	1.50	10.0	7	50.00	60.00	27.00	A	1.2	138.00	159.00	1~	FFQ4 SOMT 120516HP	0.84	12.70~	R~	9.0~	FDA02G2700H$07~	3107339
FFQ4 D100-8-32-12	78.00	100.00	1.50	10.0	8	50.00	78.00	32.00	B	0.9	178.00	199.00	1~	FFQ4 SOMT 120516HP	1.30	12.70~	R~	9.0~	FDA02G3200H$07~	3107340
FFQ4 D125-10-40-12	103.00	125.00	1.50	10.0	10	63.00	92.00	40.00	B	0.7	228.00	249.00	1~	FFQ4 SOMT 120516HP	2.17	12.70~	R~	9.0~	FDA02G4000H$07~	3331234

To generate a straight surface without cusps, the width of cut must not exceed DC
Radius for programming: for insert SOMT 3 mm, for insert SOMW 4 mm
When mounting insert SOMW, APMX=1.2 mm
For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%
For cutting conditions click on "More info"

Milling
Main Application

Site Map

Milling Main Application

Site Map

Milling
Main Application