ISCAR Cutting Tools - Metal Working Tools - Milling - Profiling

Customized Items ×

Choose an item to customize and generate a quotation

TR6 ER-M : Multifunction endmills with FLEXFIT threaded adaptation that carry four different insert geometries.(-)Multifunction Endmills with FLEXFIT Threaded Adaptation That Carry Four Different Insert Geometries(+)

Representative Image

Tool shown with TR6 TNCU inserts

Representative Image

Tool shown with TR6 TNCU inserts

Designation	DCX	DCX_2	DCX_3	DCX_4	DC	DC_2	DC_4	APMX	APMX_2	APMX_3	APMX_4	APMXU	BHTA	CICT	LF	LF_2	LF_3	LF_4	RMPX°_2	OAL	OAL_2	OAL_3	OAL_4	DCONMS	THSZMS	MIID	MIID_2	MIID_3	MIID_4	DRVS	TQ_3		HAND	IC	CCMS	CSP	ZEFF	GICAT
TR6 ER D16/0.63-2-M08-07	16.00	16.00	16.00	-	14.00	12.10	-	1.00	0.60	2.50	-	2.00	18.0	2	24.64	24.90	25.00	-	1.3	42.20	42.40	42.50	-	13.00	M08	TR6 TNCU 070210	TRFF TXMT 0702	TR90 TXMT 070204	-	11.0	20	0.03	R~	5.30~	SAI02C0120~	1~	~	3320744
TR6 ER D20/0.79-4-M10-07	20.00	20.00	20.00	-	18.00	16.10	-	1.00	0.60	2.50	-	2.00	18.0	4	24.64	24.90	25.00	-	1.0	44.70	44.90	45.00	-	18.00	M10	TR6 TNCU 070210	TRFF TXMT 0702	TR90 TXMT 070204	-	15.0	29	0.05	R~	5.30~	SAI02C0120~	1~	~	3320745
TR6 ER D25/0.98-5-M12-07	25.00	25.00	25.00	-	23.00	21.10	-	1.00	0.60	2.50	-	2.00	18.0	5	29.64	29.90	30.00	-	0.7	51.70	51.90	52.00	-	21.00	M12	TR6 TNCU 070210	TRFF TXMT 0702	TR90 TXMT 070204	-	17.0	33	0.08	R~	5.30~	SAI02C0120~	1~	~	3320746
TR6 ER D32/1.26-6-M16-07	32.00	32.00	32.00	-	30.00	28.10	-	1.00	0.60	2.50	-	2.00	18.0	6	34.64	34.90	35.00	-	0.5	59.70	59.90	60.00	-	29.00	M16	TR6 TNCU 070210	TRFF TXMT 0702	TR90 TXMT 070204	-	25.0	40	0.18	R~	5.30~	SAI02C0120~	1~	~	3320747
TR6 ER D35/1.38-6-M16-07	35.00	35.00	35.00	-	33.00	31.10	-	1.00	0.60	2.50	-	2.00	18.0	6	34.64	34.90	35.00	-	0.5	59.70	59.90	60.00	-	29.00	M16	TR6 TNCU 070210	TRFF TXMT 0702	TR90 TXMT 070204	-	25.0	40	0.19	R~	5.30~	SAI02C0120~	1~	~	3320748
TR6 ER D25/0.98-3-M12-10	25.00	24.60	25.00	26.80	20.00	20.60	20.60	2.50	0.80	4.00	3.00	4.20	17.0	3	24.97	25.15	25.12	25.12	1.7	47.00	47.15	46.91	47.12	21.00	M12	TR6 TNCU 100425	TRFF TXMT 1004	TR90 TXMT 100408	TR45 TXMT 1004	19.0	33	0.06	R~	7.30~	SAI02C0000~	1~	~	3346857
TR6 ER D32/1.26-4-M16-10	32.00	31.60	32.00	33.80	27.00	27.60	27.60	2.50	0.80	4.00	3.00	4.20	17.0	4	34.97	35.15	35.12	35.12	1.2	60.00	60.15	59.91	60.12	29.00	M16	TR6 TNCU 100425	TRFF TXMT 1004	TR90 TXMT 100408	TR45 TXMT 1004	25.0	40	0.17	R~	7.30~	SAI02C0150~	1~	~	3344364
TR6 ER D35/1.38-5-M16-10	35.00	34.60	35.00	36.80	30.00	30.60	30.60	2.50	0.80	4.00	3.00	4.20	17.0	5	34.97	35.15	35.12	35.12	1.1	60.00	60.15	59.91	60.12	29.00	M16	TR6 TNCU 100425	TRFF TXMT 1004	TR90 TXMT 100408	TR45 TXMT 1004	25.0	40	0.18	R~	7.30~	SAI02C0120~	1~	~	3320737

Note: The dimensions refer to master inserts, for other insert radii and geometries dimensions click on "More Info"
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter

Milling
Main Application

Profiling
Sub Application

Site Map

Milling Main Application

Profiling Sub Application

Site Map

Milling
Main Application

Profiling
Sub Application