ISCAR Cutting Tools - Metal Working Tools - Milling - Drill Mill

FFX4 ED-MM : Endmills with MULTI-MASTER threaded adaptation carrying small double-sided "bone shape" inserts with 4 cutting edges, for fast feed milling. Used for small size pockets milling.(-)Endmills with MULTI-MASTER Adaptation Carrying Small "Bone Shape" Inserts with 4 Cutting Edges for Fast Feed Milling(+)

Designation	DCX	DC	CICT	APMX	AE	THSZMS	LF	OAL	DCONMS	RMPX°	MDN	MDX	DRVS	MIID		HAND	Rg		Pocket	KAPR	e	CNSC	CXSC	ISYC	ISCTMP	ClssID	GTC	ZNP	BMC	CCTMS	CCFMS	CCMS	D Inner	CSP	CUBPMS	CZCMS	FF/RN/P	IIC	TCDCONMS	UST	ZADJ	ZEFF	GICAT	GICODE
FFX4 ED16/.63-2-MMT10-04	16.00	8.60	2	0.80	3.7	T10	20.00	31.75	15.20	4.3	24.60	31.00	13.0	FFX4 XNMU 040310T	0.9~	R~	1.80	0.02	~	17.0~	3~	1~	3~	307-02~	GEMLT060100~	71E01A05D27A8~	MILSQI_MSAI01~	2~	S~	SAI~	01~	SAI01C0080$$$$~	8.60~	1~	C~	0080~	FF~	~	$$$$~	C~	0~	2~	3336688	Y
FFX4 ED20/.78-3-MMT12-04	20.00	12.60	3	0.80	2.2	T12	25.00	38.30	18.80	2.7	32.60	39.00	15.0	FFX4 XNMU 040310T	0.9~	R~	1.80	0.04	~	17.0~	3~	1~	3~	307-02~	GEMLT060100~	71E01A05D27A8~	MILSQI_MSAI01~	3~	S~	SAI~	01~	SAI01C0080$$$$~	15.60~	1~	C~	0080~	FF~	~	$$$$~	C~	0~	3~	3380518	Y
FFX4 ED25/.98-4-MMT15-04	25.00	17.60	4	0.80	2.2	T15	30.00	47.00	24.00	1.8	42.60	49.00	19.0	FFX4 XNMU 040310T	0.9~	R~	1.80	0.14	~	17.0~	3~	1~	3~	307-02~	GEMLT060100~	71E01A05D27A8~	MILSQI_MSAI01~	4~	S~	SAI~	01~	SAI01C0080$$$$~	20.60~	1~	C~	0080~	FF~	~	$$$$~	C~	0~	4~	3380519	Y

For adaptation, click on "More Info"
To generate a straight surface without cusps, the width of cut must not exceed DC

Click to See Test Report... ►

TECHKNOW

Milling
Main Application

Drill Mill
Sub Application

Site Map

TECHKNOW

Milling Main Application

Drill Mill Sub Application

Site Map

Milling
Main Application

Drill Mill
Sub Application