| ISO | Material | Material Designation | Material Condition | Hardness | Cutting Speed Recommendations (Vc) |
| N | 21 | Aluminum-wrought alloys | Not cureable | 60 HB | 335-965 m/min |
| N | 22 | Aluminum-wrought alloys | Cured | 100 HB | 250-670 m/min |
| N | 23 | Aluminum-cast alloys <12% Si | Not cureable | 75 HB | 270-845 m/min |
| N | 24 | Aluminum-cast alloys | Cured | 90 HB | 185-515 m/min |
| N | 25 | Aluminum-cast alloys >12% Si | High temperature | 130 HB | 175-315 m/min |
| N | 26 | Copper alloys >1% Pb | Free cutting | 110 HB | 165-315 m/min |
| N | 27 | Copper alloys | Brass | 90 HB | 130-240 m/min |
| N | 28 | Copper alloys | Electrolytic copper | 100 HB | 90-165 m/min |
| N | 29 | Non metallic | Duro& fiber plastics | 60 HB | 50-200 m/min |