TECHKNOW

Resize
Dock/Undock
NEW FAQ ADDED
X
× Login Information

Grade : IC228

A TiN PVD coated tough grade. Used for grooving and threading wide range of workpiece materials at low cutting speed.

PropertyValue
ISO Range - P/M/K(P25-P50)(M30-M40)(K20-K50)
ISO Range - H/S/N (N20-N40)(S25-S30)

PropertyValue
Grade or Coating TypePVD
Coating Layers TiCN+TiN


Find group of specific workpiece material (opens in a new window)


Cutting Speed for: 11IR 1.50 ISO IC228 - 5990127
ISOMaterialMaterial DesignationMaterial ConditionCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%CAnnealed :12585-165 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%CAnnealed :19085-160 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%CQuench and tempered. :25075-150 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%CAnnealed :22075-140 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%CQuenched & tempered. :30070-130 m/min
P6Low alloy & cast steel (less than 5% of alloying elements)Annealed :20095-145 m/min
P7Low alloy & cast steel (less than 5% of alloying elements)Quenched & tempered :27590-130 m/min
P8Low alloy & cast steel (less than 5% of alloying elements)Quenched & tempered :30080-125 m/min
P9Low alloy & cast steel (less than 5% of alloying elements)Quenched & tempered :35070-115 m/min
P10High alloyed steel, cast steel and tool steelAnnealed :20075-135 m/min
P11High alloyed steel, cast steel and tool steelQuenched & tempered :32560-115 m/min
P12Stainless steel and cast steelFerritic/martensitic :20085-135 m/min
P13Stainless steel and cast steelMartensitic :24080-125 m/min
M14Stainless steel and cast steelAustenitic :18075-120 m/min
K15Grey cast iron (GG)Pearlitic/ferritic :18065-120 m/min
K16Grey cast iron (GG)Pearlitic/martensiti :26060-95 m/min
K17Nodular cast iron (GGG)Ferritic :16055-115 m/min
K18Nodular cast iron (GGG)Pearlitic :25050-85 m/min
K19Malleable cast ironFerritic :13055-100 m/min
K20Malleable cast ironPearlitic :23050-105 m/min
N21Aluminum-wrought alloyNot cureable : 6090-240 m/min
N22Aluminum-wrought alloyCured :10085-170 m/min
N23Aluminum-cast, alloyed <12% SiNot cureable : 75130-305 m/min
N24Aluminum-cast, alloyedCured : 90130-235 m/min
N25Aluminum-cast, alloyed >12% SiHigh temperature :130100-200 m/min
N26Copper alloys >1% PbFree cutting :110110-280 m/min
N27Copper alloysBrass : 90110-280 m/min
N28Copper alloysElectrolitic copper :100110-275 m/min
N29Non metallicDuro& fiber plastics : 6075-290 m/min
N30Non metallicHard rubber : 5565-265 m/min
S31High temp. alloys Fe basedAnnealed :20020-50 m/min
S32High temp. alloys Fe basedCured :28020-40 m/min
S33High temp. alloys. Ni or Co basedAnnealed :25015-25 m/min
S34High temp. alloys. Ni or Co basedCured :35010-15 m/min
S35High temp. alloys. Ni or Co basedCast :32010-20 m/min
S36Titanium (pure)Pure :11045-90 m/min
S37Titanium Ti alloysAlpha+beta alloys cu :31020-60 m/min
H38Hardened steelHardened :56025-50 m/min
H39Hardened steelHardened :65420-35 m/min
H40Chilled cast ironCast :40025-50 m/min
H41Cast ironHardened :56020-45 m/min

Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2019 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved