Grade : IC354

A tough substrate with PVD coating, suitable for general use on a wide range of carbon steels, alloy steels and stainless steel at moderate speeds and feeds.

PropertyValue
ISO Range - P/M/K(P20-P40)(M10-M30)
ISO Range - N/S/H

PropertyValue
Grade or Coating TypePVD
Coating Layers TiCN


Find group of specific workpiece material (opens in a new window)


Cutting Speed for: DGR 2200JS-15D IC354 - 6098676
ISOMaterialMaterial DesignationMaterial ConditionHardnessCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed125 HB100-145 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed190 HB85-125 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55% CQuenched and tempered250 HB70-115 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55% CAnnealed220 HB75-115 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55% CQuenched and tempered.300 HB60-95 m/min
P6Low alloy and cast steel (less than 5% of alloying elements)Annealed200 HB75-115 m/min
P7Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered275 HB65-105 m/min
P8Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered300 HB60-95 m/min
P9Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered350 HB55-85 m/min
P10High alloyed steel, cast steel and tool steelAnnealed200 HB80-125 m/min
P11High alloyed steel, cast steel and tool steelQuenched and tempered325 HB55-85 m/min
P12Stainless steel and cast steelFerritic/martensitic200 HB60-135 m/min
P13Stainless steel and cast steelMartensitic240 HB60-130 m/min
M14Stainless steel and cast steelAustenitic, duplex180 HB45-120 m/min

Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved