Grade : IC808

A tough, submicron substrate with excellent chipping resistance, combined with a "SUMO TEC" PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.

PropertyValue
ISO Range - P/M/K(P15-P30)(M20-M30)(K20-K30)
ISO Range - N/S/H (H20-H30)(S10-S25)

PropertyValue
Grade or Coating TypePVD
Coating Layers TiAlN/AlTiN+TiN


Find group of specific workpiece material (opens in a new window)


Cutting Speed for: DGN 3102LF IC808 - 6004887
ISOMaterialMaterial DesignationMaterial ConditionHardnessCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed125 HB135-200 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed190 HB115-175 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55% CQuenched and tempered250 HB90-150 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55% CAnnealed220 HB105-170 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55% CQuenched and tempered.300 HB80-140 m/min
P6Low alloy and cast steel (less than 5% of alloying elements)Annealed200 HB100-155 m/min
P7Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered275 HB80-145 m/min
P8Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered300 HB80-130 m/min
P9Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered350 HB75-125 m/min
P10High alloyed steel, cast steel and tool steelAnnealed200 HB105-155 m/min
P11High alloyed steel, cast steel and tool steelQuenched and tempered325 HB70-120 m/min
P12Stainless steel and cast steelFerritic/martensitic200 HB100-190 m/min
P13Stainless steel and cast steelMartensitic240 HB85-175 m/min
M14Stainless steel and cast steelAustenitic, duplex180 HB75-155 m/min
K15Grey cast iron (GG)Pearlitic/ferritic180 HB100-175 m/min
K16Grey cast iron (GG)Pearlitic/martensitic260 HB85-130 m/min
K17Nodular cast iron (GGG)Ferritic160 HB95-170 m/min
K18Nodular cast iron (GGG)Pearlitic250 HB75-125 m/min
K19Malleable cast ironFerritic130 HB120-195 m/min
K20Malleable cast ironPearlitic230 HB95-155 m/min
N21Aluminum-wrought alloysNot hardenable60 HB330-990 m/min
N22Aluminum-wrought alloysHardenable100 HB250-825 m/min
N23Aluminum-cast alloys <=12% SiNot hardenable75 HB250-825 m/min
N24Aluminum-cast alloys <=12% SiHardenable90 HB165-495 m/min
N25Aluminum-cast alloys >12% SiHigh temperature130 HB165-330 m/min
N26Copper alloys >1% PbFree cutting110 HB165-330 m/min
N27Copper alloysBrass90 HB120-250 m/min
N28Copper alloysElectrolytic copper100 HB80-165 m/min
N29Non metallic.Duro& fiber plastics40-165 m/min
N30Non metallicHard rubber40-165 m/min
S31High temp. alloys Fe basedAnnealed200 HB30-55 m/min
S32High temp. alloys Fe basedHardened280 HB20-40 m/min
S33High temp. alloys Ni or Co basedAnnealed250 HB25-35 m/min
S34High temp. alloys. Ni or Co basedHardened350 HB20-30 m/min
S35High temp. alloys. Ni or Co basedCast320 HB15-25 m/min
S36Titanium (pure)Pure190 HB90-140 m/min
S37Titanium alloysAlpha+beta alloys, hardened310 HB35-60 m/min
H38Hardened steelHardened55 HRC25-35 m/min
H39Hardened steelHardened60 HRC20-30 m/min
H40Chilled cast ironCast400 HB35-50 m/min
H41Cast ironHardened55 HRC30-35 m/min

Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved