C#-ABB : Adapters with CAMFIX (ISO 26623-1 standard) exchangeable shanks for boring bars with reduction sleeves.
Catalog No : 4509538 - C5 ABB-25-60
Coolant Nozzle Adjustment Instructions:
1- Open the nut by turning it approximately three-quarters of a turn counter clockwise.
2- Adjust the coolant nozzle eye so that it will direct theccoolant to the area of the cutting edge.
3- Close the nut by turning it approximately three-quartersfof a turn clockwise.
4- The special (WRENCH NOZZLE HP M12) key should be used.