HSK A-WH-ASHR/L-1 : Square shank tool adapters with HSK exchangeable shanks for turn-mill machines.
Left-hand shown
Right-hand shown
Left-hand shown
Right-hand shown
Coolant Nozzle Adjustment Instructions:
1- Open the nut by turning it approximately three-quarters of a turn counter clockwise.
2- Adjust the coolant nozzle eye so that it will direct thecoolant to the area of the cutting edge.
3- Close the nut by turning it approximately three-quartersof a turn clockwise.
4- The special (WRENCH NOZZLE HP M12) key should be used.