X
Milling
Drill Mill


E90XC
Drilling Endmills Carrying Square S/XOMT Inserts


E90AC
Drilling Endmills Carrying APKT/ADKT Inserts


HCM D12
Ball Nose Multifunction Endmills D=12 mm


HCM D16
Ball Nose Multifunction Endmills D=16 mm


HCM D20
Ball Nose Multifunction Endmills D=20 mm


HCM D25
Ball Nose Multifunction Endmills D=25 mm


HCM-MM
Ball Nose Multifunction Endmills with MULTI-MASTER Threaded Adaptation


HCM-M
Ball Nose Multifunction Endmills with FLEXFIT Threaded Adaptation


HCE
Multifunction Endmills that Can Carry Several Insert Geometries


HCE-MM
Multifunction Endmills with a MULTI-MASTER Threaded Adaptation that Can Carry Several Insert Geometries


MM HC
Interchangeable Solid Carbide Slot Drill Milling Heads with Two 10° Helix Flutes


MM EA
Interchangeable Solid Carbide Slot Drill Milling Heads for Machining Aluminum


MM EA-CF
Interchangeable Solid Carbide Endmill Heads with Different Helix for Machining Aluminum


MM ECU
Interchangeable 3 Flute Undersized Solid Carbide Heads for Keyways (DIN 6885)


MM EC-4
Interchangeable 4 Flute Solid Carbide Endmill Heads with 30° and 45° Helix and Various Corner Radii


MM EC-3
Interchangeable 3 Flute Solid Carbide Endmill Heads with 45° Helix


MM EFCB
Interchangeable 4 Flute 30° Helix Solid Carbide Heads for Flat Counter Boring


MM HT
Torodial 2 Flute Interchangeable Solid Carbide Heads


MM HT-NCSR
2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads


MM HT-NWFR
2 Flute Toroidal Solid Carbide Milling Heads with a Side Tangential Wiper


MM HCD
Interchangeable 2 Flute Solid Carbide Heads for Chamfering, Countersinking and Spot Drilling


ECD-S2
45° Chamfering and Spot Drilling Solid Carbide Tools


EC-A-2
2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills


ECC-A-2
2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners


ECL-B-4/6
4 & 6 Flute, 45° Helix Long Solid Carbide Endmills


EC-E-3
3 Flute, 38° Helix Medium Length Solid Carbide Endmills


EC-A-4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills


EC-B-3
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills


EC-B-4
4 Flute, 45° Helix Medium Length Solid Carbide Endmills


ECC-E-3
3 Flute, 38 and 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners


ECC-A-4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners


ECXL-B-4/6
4 & 6 Flute, 45° Helix Extra Long Solid Carbide Endmills


ECA-B-2
2 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum


ERF-A/E-3,4,6
3, 4, and 6 Flute, 30° and 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Neck for Alloy Steel


ERC-E-3
3 Flute, 38° Helix Medium Length Solid Carbide Roughing Endmills with 3xD Relieved Necks for Machining Aluminum


ECS/ECCS-E-3
3 Flute, 38° Helix Short Solid Carbide Slot / Drill Endmills with 3xD Relieved Necks and Chamfered Corners


ECU-E-3
3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills


EC-B-3R
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Various Radii


EC-B-4R
4 Flute, 45° Helix Medium Length Solid Carbide Endmills with Various Radii


ECA-F-2
2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum


EC-A-4R
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Various Radii


ECR-B-L
4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks


ECR-B-M/ECR-B-M...R
4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills


ECR-B-X
4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks


MM FF
Interchangeable 2 Flute FEEDMILL Solid Carbide Heads for Milling at Very Fast Feeds and Small D.O.C.


ECR-B3-R
3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks for High Stock Removal Rates of Aluminum


ECA-B-3
3 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum


ECR-T-M
4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills for High Stock Removal Rates


ECU-E-3-R
3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills with Various Radii According to DIN 6885


EBRF-T
3, 4 Flute, 20° Helix Long Solid Carbide Ball Nose Endmills for Roughing Materials up to 55 HRC


EC-A2-M (rib processing)
2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing on Hard Materials up to 55 HRC


EC-A3/E3 (economical-short)
Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Short Length Solid Carbide Endmills


EC-A4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills for Hard Materials up to 65 HRC


EC-B3 (economical-short)
Economical Type 3 Flute, 45° Helix, Center Cutting, Short Length Solid Carbide Endmills


EC-B4-R
4 Flute, 45° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii for Hardened Steel


EC-A2 (medium length)
2 Flute, 30° Helix Medium Length Solid Carbide Endmills for Hard Materials up to 65 HRC


EC-A4(economical-extra long)
Economical Type 4 Flute, 30° Helix, Center Cutting, Extra Long Solid Carbide Endmills


EFS-B44
Combination of Roughing and Finishing Solid Carbide Endmills in a Single Tool


EC-A2 (economical-short)
Economical Type 2 Flute, 30° Helix Center Cutting Short Solid Carbide Endmills


ECP-E3L
3 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges


ECP-E4L
4 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges


ETR-A2
2 Flute Toroidal Endmills


ECR-B-MF
4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc


MM EFS
Combination of Roughing and Finishing Interchangeable Solid Carbide Endmill Heads


EC-E4L-CF
4 Flute, 38° Helix Endmills with 3xD Relieved Necks and Variable Pitch for Chatter Dampening


MM EC-CF
Interchangeable Solid Carbide Endmill Heads for Chatter Free Roughing and Finishing Operations


EC-A2 (economical-medium)
Economical Type 2 Flute, 30° Helix Center Cutting, Medium Length Solid Carbide Endmills


EC-A2(economical-extra long)
Economical Type 2 Flute, 30° Helix, Center Cutting, Extra Long Solid Carbide Endmills


EC-A3/E3 (economical-medium)
Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Medium Length Solid Carbide Endmills


EC-B3 (economical-medium)
Economical Type 3 Flute, 45° Helix, Center Cutting, Medium Length Solid Carbide Endmills


EC-A4 (economical-medium)
Economical Type 4 Flute, 30° Helix, Center Cutting, Medium Length Solid Carbide Endmills


EFS-E44
Combination of Roughing and Finishing Solid Carbide Endmills with Variable Pitch for Chatter Free Milling


ECA-H3-CF
Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum


MM EFS-CF
4 Flute Solid Carbide Heads with 38° Helix and Variable Pitch for Chatter Free Roughing and Finishing Aplications


MM EFF
4, 6 Flute Solid Carbide Heads for Milling at Very Fast Feeds and Small D.O.C.


EC-H4L-CFR (relieved neck)
4 Flute Endmills with 3xD Relieved Necks, Assorted Radii, Different Helix and Variable Pitch for Chatter Dampening


EC-H4M-CFR
4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening with Assorted Radii


EC-H4XL-CFR (relieved neck)
4 Flute Endmills with 4xD Relieved Necks, Assorted Radii, Different Helix and Variable Pitch for Chatter Dampening


EFP-E4,5CF
Solid Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Frontal Edge


EPNC
Solid Endmills for Machining CFRP Materials at High Stock Removal Rates


EPND
Solid Endmills for Drilling and Contouring on CFRP Materials at High Stock Removal Rates


EC-H4M-CF-E
4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening


EC-A2-R (rib processing)
2 Flute, 30° Helix and Corner Radii Solid Carbide Endmills for Rib Processing on Hard Materials up to 65 HRC


EC-A2-H (rib processing)
2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing on Hard Materials up to 65 HRC


ECP-H4L-CFR
4 Flute Solid Carbide Endmills with Different Helix, Variable Pitch and Chip Splitting Cutting Edges for Roughing


EC-H4S-CF
Short 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening


ECR-B3-R-C
3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Coolant Channels for Aluminum