ISCAR is expanding the small diameter range of its leading SUMOCHAM hole making line to include new heads and tools:
Heads: from 4.0 mm up to 5.9 mm - smallest in the world
Drill bodies: from 4.0 mm up to 9.9 mm - straight shank design
The new SUMOCHAM heads are available in 4.0 up to 5.9 mm diameters:
ICP - 4.0-5.9 with 0.1 mm increments
ICM- 5.0-5.9 with 0.1 mm increments
ICK - 5.0, 5.5 & 5.9 mm
The drill bodies are available in 3xD and 5xD length to diameter ratios. The inserts are supplied in a specifically developed user-friendly key, enabling easy mounting with no setup time.
The new SUMOCHAM drill bodies have a straight shank design and are available in 3xD and 5xD length diameter ratios.
They are applicable for head diameters 4.0 up to 9.9 mm with 0.5 mm increments and can be used with ER16 collets.
ICP/ICK/ICM Drilling Head Features
Made from IC908 TiAlN PVD nano layer coated grade
High wear resistance
Stable and predictable wear progression
IT10 tolerance can be obtained
DCN Drill Features
High strength steel body
Internal coolant supply
Small diameter shank suitable for collet adaptation and Swiss-type machines
Specifically designed back-end for efficient MQL coolant passage
SK DCN Clamping Key Features
User-friendly, ergonomic design for easy insert mounting
Supplied with flexible tube to secure the insert in place
Once the worn insert is removed, the key and the insert should be discarded
DCN C-3D
Indexable Head Drills with Coolant Holes and a Cylindrical Shank, Drilling Depth 3xD
1) The SK DCN key is supplied with the insert
(2) Cutting diameter minimum
• Do not mount smaller drilling heads other than the specified range of the drill body
(3) Cutting diameter maximum
(4) Seat size code
DCN C-5D
Indexable Head Drills with Coolant Holes and a Cylindrical Shank, Drilling Depth 5xD
1) The SK DCN key is supplied with the insert
(2) Cutting diameter minimum
• Do not mount smaller drilling heads other than the specified range of the drill body
(3) Cutting diameter maximum
(4) Seat size code
ICM
Exchangeable DCN Drill Heads, for Stainless Steel (ISO M Materials)
(1) Seat size code
ICK
Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
(1) Seat size code
ICP
Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
(1) Seat size code
Drilling Head Mounting Procedure
Drilling Limitations
Max 0.02mm
Max 0.02mm
liter/min
Coolant Flow Rate
Drill Diameter D (mm)
Dia.
bar
Minimum Coolant Pressure
Dia.
Coolant Recommendations
Dry machining
Up to 2XD
Material Groups
Use external coolant during penetration when machining ISO M materials