TECHKNOW

Resize
Dock/Undock
NEW FAQ ADDED
X
Our website uses cookies and other technologies to ensure you get the best browsing experience.

You can change your cookie settings at any time.

Find out more on how we use cookies.

MILLING
NPA 20/2018


CHAMFMILL

Front and Back Chamfer Milling Tools


Highlights
New CHAMFMILL tools for front and back chamfering, carrying PNMT 06 pentagonal inserts with five cutting edges for front chamfering and five for back chamfering.



ISCAR is introducing the CHAMFMILL family of indexable milling cutters for front and back chamfering.

The new cutters carry star-shaped (pentagonal) double-sided inserts with 10 cutting edges - 5 intended for front chamfering and 5 for back chamfering.

The main applications of the new tools include machining outer and inner small chamfer widths and removing burrs.

Insert Features
  • 5 cutting edges for front chamfering
  • 5 cutting edges for back chamfering
  • Produced from the advantageous IC830 ISCAR’s SUMO TEC carbide grade
  • Maximum width of machined 45° chamfer is 1.5 mm


 



Tool Features
  • Two shank configurations are available:
    - Cylindrical shank
    - Replaceable milling heads with MULTI-MASTER adaptation
  • Available in 11.70, 16.70 and 18.70 mm tool diameters
  • Suitable for back milling chamfers in 10 mm minimum diameter holes
  • Polish coating to ensure better chip flow and tool protection from corrosion and wear


Applications
  • Machining main engineering materials: steel (ISO P), stainless steel (ISO M) and cast iron (ISO K)
  • Front chamfering, back chamfering, eliminating hand de-burring


Benefits
  • Economical: inserts with 5 front and 5 back cutting edges
  • Productive machining due to high cutting speed


Recommended cutting conditions
Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
* ISCAR material group in accordance with VDI 3323 standard
** Quenched and tempered
1. The table provides reference cutting conditions, it should be adjusted according to the condition of the machine tool and workpiece
2. Wet cutting is recommended to obtain good surface quality.
3. In case built-up edge occurs during cutting stainless steel, use soluble oil.


CH45-PN06
Upper and Bottom Chamfering Endmills Carrying Pentagonal Inserts
(1) Number of inserts
(2) Minimum penetration diameter for back chamfering
(3) Item weight



CH45-MM-PN06
Upper and Bottom Chamfering Endmills with MULTI-MASTER Threaded Adaptation
• Do not apply lubricant to the MULTI-M ASTER threaded connection
(1) Number of inserts
(2) Key flat size
(3) Minimum penetration diameter for back chamfering
(4) Item weightt




PNMT 0602-TN
Pentagonal Inserts for Upper and Bottom Chamfering




The NPA20-2018's pdf file: View (PDF) or Download (ZIP)
Terms of Use and Legal Disclaimer    Privacy Statement
© ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved