ISO-TURN
NPA 10/2019
New F3S Chipformer for Finish Turning On Superalloys and Exotic Materials
Highlights
ISCAR is introducing the new F3S chipformer for finish turning operations for superalloy materials.
Intended mainly for aerospace industries as well as for the oil & gas market, the new efficient chip
breaker for finishing operations is designed for working with unique and tough to machine nickel
based alloys (Inconel, Waspaloy, etc.), as well as other exotic materials such as titanium based
alloys.
The new F3S chipformer has a remarkable positive rake angle to ensure a smooth and easy cut,
with significant reduction in cutting forces and notable chip breaking results.
The F3S chipformer has been designed with geometric features to improve tool life, with a
reinforced cutting edge at the area where VG (notch wear) wear tends to occur when machining
superalloys and exotic materials, which causes poor surface finish and risk of edge breakage.
The chipformer is available on the most popular inserts - CNMG, WNMG and SNMG - in two
main grades, IC806 and IC804, and will be available in the future also on VNMG, DNMG, and
TNMG inserts.
F3S Characteristics
Ground surface for improved
immovability and better rigidity
Positive rake angle for smooth and easy cut
Unique deflector design for efficient chip control at low
feed and D.O.C
Reinforced cutting edge to
Code Key
The code characters of the new chipformer F3S are indicated in the code key table below:
F3S Machining Range
The F3S chipformer delivers very efficient chip breaking results at 0.5-2 D.O.C and 0.1-0.3 mm/rev feed range.
- Double–sided insert with chipbreaker for finishing superalloys and exotic materials
- Reinforced cutting edge
- Positive rake angle for smooth cutting and low forces
Chip breaking results with CNMG 120404-F3S can be seen in the table below
Material: Inconel 718
Vc: 60 m/min
ISCAR’s F3S Chipformer vs. Main Competitors
ap: 0.3-3 mm
f: 0.05-0.3 mm/rev
FIELD TEST
Material -Inconel 718
|
Competitor |
ISCAR - Test 1 |
Insert |
SNMG 120408-F5 |
CNMG 120404-F3S |
Carbide grade |
KX20 |
IC806 |
External starting diameter (mm) |
15 |
15 |
Cutting speed (m/min) |
25 |
25 |
Spindle speed (rpm) |
796 |
796 |
Feed (mm/rev) |
0.06 |
0.06 |
Depth of cut (mm) |
1 |
1 |
Number of passes |
5 |
5 |
Length of cut (mm) |
25 |
25 |
Parts per cutting edge |
15 |
25 |
67% increase in tool life
CNMG-F3S
Double-Sided 80° Rhombic Inserts for Titanium and Heat Resistant Materials.
Used for Finishing Applications.
SNMG-F3S
Double-Sided 90° Square Inserts for Titanium and Heat Resistant Materials.
Used for Finishing Applications.
WNMG-F3S
Double-Sided 80° Trigon Inserts for Titanium and Heat Resistant Materials
Used for Finishing Applications
The NPA10-2019's pdf file:
View (PDF) or
Download (ZIP)