TECHKNOW

Resize
Dock/Undock
NEW FAQ ADDED
X

PARTING & GROOVING
NPA 8/2021


Expanding the PENTACUT Line with New Inserts and Tools


PENTA-CUT

Highlights
ISCAR is expanding the PENTACUT Line by adding:
  • PENTA 17 ... new SP (Super Positive) chipformer
  • PENTA 17 JET CUT toolholders in shank sizes of 10-25 mm
  • PENTA 17 JET CUT adapters
  • PENTA 17R\L...6D/15D for Parting
  • PENTA 27 new blanks with 10 and 15 mm widths for wide profiles
  • PENTA 24 inserts with IC1010 grade 1.5\2.0\3.0 mm neutral version types



Products and Features
  • PENTA 17 ... with the new SP chipformer is intended for machining soft materials and stainless steel.
    The 18° positive rake angle of the insert assures low cutting forces and provides easy chip breaking for low feed rates from 0.02-0.06 mm/rev.
    The inserts are available in sizes 0.3\0.5\0.8\1.0 mm.



  • JETCUT square shank toolholder for PENTA 17 inserts are designed to provide high-pressure coolant of up to 340 Bar.
    The tools have 3 coolant inlets that enable several connection options and two outlets to cool the insert from the top and bottom in the most efficient way.
    The tools are available in 10-25 mm.



  • New PCADRS/LS adapters for PENTA 17 inserts are designed to provide high-pressure coolant of up to 340 Bar. These adapters have 2 coolant outlets from the top and bottom of the tool pocket which enable efficient flow of the coolant.
    The adapters fit standard MAHR/L and MAHPR/L tools.



  • PENTA 17R\L...6D/15D lead angle cutting edge inserts were designed for Parting when minimum burr size is needed. Offered with 6° and 15° lead angles.
    The inserts are available in sizes 1.0\1.5 and 2.0 mm.

  • PENTA 27 new blanks with 10 and 15 mm widths were added to ISCAR’s wide PENTA 27-20FT blank (20 mm width). These new blanks can be ground to special wide profiles that assure an economical price per cutting edge based on the 5 cutting edge feature. These insert blanks are intended for shallow profiling and grooving depth for square type holders PCHR\L...-27-10\15\20.



  • PENTA 24 popular size inserts in IC1010 grade.
    Due to the positive sales growth of the TANG-GRIP and DO-GRIP inserts grade IC1010, this phenomenal grade has been added to the PENTA 24 line. Available in 1.5, 2.0, 3.0 mm widths.


Grade Features
  • TiAlN coating overlays the sub-micron IC08 grade
  • Recommended for general parting and grooving applications at medium to high cutting speeds and low to medium feeds
  • Toughness advantages compared to grades IC908 and IC808
  • The cutting parameters are the same compared to grade IC808



PCHRS/LS-17-JHP
Tools Carrying Inserts with 5 Cutting Edges for Shallow Profiling Next to High Shoulders
• Use right-hand inserts on right-hand tools and vice versa




PCADRS/LS-JHP
Adapters with High-Pressure Coolant Holes for PENTACUT 17
• CDX and CUTDIA according to insert limitation
(1) Minimum cutting width
(2) Maximum cutting width
(3) Maximum overhang




PENTA 17R/L-P-RS
Lead Angle Edge Pentagonal Inserts (5 edges) for Parting Miniature Parts



PENTA 17R/L-SP-RS
Pentagonal Inserts (5 edges) with a High Positive Rake for Parting Soft Materials



PCHR/L-27-JHP-MC
Tools Carrying Pentagonal Wide Inserts for Specially Tailored Profiles



PENTAS 27 blanks
Blank Insert with 5 Wide Cutting Edges for the Production of Special Profile Contours




The NPA08-2021's pdf file: View (PDF) or Download (ZIP)
© ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved