Front and Back Chamfer Milling Tools
New CHAMFMILL tools for front and back chamfering, carrying PNMT 06 pentagonal inserts with five cutting edges for front chamfering and five for back chamfering.
ISCAR is introducing the CHAMFMILL family of indexable milling cutters for front and back chamfering.
The new cutters carry star-shaped (pentagonal) double-sided inserts with 10 cutting edges - 5 intended for front chamfering and 5 for back chamfering.
The main applications of the new tools include machining outer and inner small chamfer widths and removing burrs.
5 cutting edges for front chamfering
5 cutting edges for back chamfering
Produced from the advantageous IC830 ISCAR’s SUMO TEC carbide grade
Maximum width of machined 45° chamfer is 1.5 mm
Two shank configurations are available:
- Cylindrical shank
- Replaceable milling heads with MULTI-MASTER adaptation
Available in 11.70, 16.70 and 18.70 mm tool diameters
Suitable for back milling chamfers in 10 mm minimum diameter holes
Polish coating to ensure better chip flow and tool protection from
corrosion and wear
Machining main engineering materials: steel (ISO P), stainless steel (ISO M) and cast iron (ISO K)
Front chamfering, back chamfering, eliminating hand de-burring
Economical: inserts with 5 front and 5 back cutting edges
Productive machining due to high cutting speed
Recommended cutting conditions
Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
* ISCAR material group in accordance with VDI 3323 standard
** Quenched and tempered
1. The table provides reference cutting conditions, it should be adjusted according to the condition of the machine tool and workpiece
2. Wet cutting is recommended to obtain good surface quality.
3. In case built-up edge occurs during cutting stainless steel, use soluble oil.
Upper and Bottom Chamfering Endmills Carrying Pentagonal Inserts
(1) Number of inserts
(2) Minimum penetration diameter for back chamfering
(3) Item weight
Upper and Bottom Chamfering Endmills with MULTI-MASTER Threaded Adaptation
• Do not apply lubricant to the MULTI-M ASTER threaded connection
(1) Number of inserts
(2) Key flat size
(3) Minimum penetration diameter for back chamfering
(4) Item weightt
Pentagonal Inserts for Upper and Bottom Chamfering
The NPA20-2018's pdf file: