Select Region

MILLING
NPA 21/2021 INCH


A New Means for Increasing Profitability in Milling Non-Ferrous Materials


SOLIDFLASH

Highlights
ISCAR is expanding the SOLID FLASH LINE with a new 3-flute series for machining aluminum and other non-ferrous materials.



The new endmills are designed with a 45° flute, wiper flat on the face end, controlled land and polished flutes that provide fluent chip evacuation, smooth cut and superb surface finish.

The tools are coated with Ta-C (Tetrahedral Amorphous Carbon) diamond like coating, also known as DLC coating. Ta-C is considered to be the superior type among the different DLC forms and therefore provides desirable qualities such as hardness, wear-resistance and slickness, and consequently prolongs tool life significantly and diminishes chip jamming.

These properties make it ideal for machining non-ferrous materials:
  • Aluminum and Aluminum alloys with up to 12% Si content
  • Copper, Bronze, Silver, Gold, and Platinum
  • Carbon and plastic
  • Composite



The new line will contain several items covering a wide range of diameters, corner radii useable lengths and reach in 3 forms with and without an extended neck:
  • Square end with sharp cutting edge
  • Ball nose
  • Bullnose


The new line is suitable for HEM toolpaths with up to 20% stepover in roughing, semi-finishing and finishing toolpaths and can perform a ramp-down of up to 3°.


ECAI-B3-EC
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



ECAI-B3-EC (continued)
3-Flute DLC Coated Endmills for Machining Aluminum and Other Non-Ferrous Materials



Cutting Conditions



EBAI-B3-EC
3-Flute DLC Coated Ball Nose Mills for Machining Aluminum and Other Non-Ferrous Materials
(1) Number of flutes


EBAI-B3-EC
3-Flute DLC Coated Ball Nose Mills for Machining Aluminum and Other Non-Ferrous Materials
(1) Number of flutes






The NPA21-2021's pdf file: View (PDF) or Download (ZIP)
Terms of Use and Legal Disclaimer    Privacy Statement
© ISCAR Metals, Metalworking Tools (Iscarmetals.com) All Rights Reserved.