TURNING
NPA 17/2019 INCH


multiFGripHolder

New Pocket Reducer Adapter for Turning Inserts


Highlights
ISCAR is introducing a new pocket adapter (pocket size reducer) to enable clamping smaller size (FLASH-TURN) inserts into the most popular ISO toolholders and, in addition, LOGIQ 4 TURN and DOVE IQ TURN inserts.


The competitive ISOTURN market requires ISCAR to seek constantly new innovative solutions while providing conservative customers the confidence to continue using existing ISO products.
To fulfill these needs, ISCAR has developed a new combination system that enables clamping small size negative inserts into standard ISO holders (both ISCAR and competitors) with the use of a simple and economic kit.

Take a standard ISO tool, replace the seat and the lever with the ones provided in the kit, and you obtain a tool that can clamp proprietary inserts such as FLASH-TURN, LOGIQ4TURN and DOVEIQTURN.



ISCAR continues to develop the ISOTURN line by adding new accessories to fit standard smaller ISO turn inserts such as CNMG 33..WNMG 33..SNMG 33… and LOGIQ CXMG 33.. into standard holders for the CNMG 43.., WNMG 43.. and SNMG 43… inserts.

In order to avoid confusion and simplify assembly, all accessories have been divided into separate sets for the indicated geometry.

The following tools can accomodate the following set combinations:

Toolholder
Set Designation
Item No.
Pocket Size Reducer
From
To



User Friendly Sets for Simple Assembly
The new sets package
INSERT
AD#-SET
SPRING
SEAT
LEVER



The following test reports show a comparison between combination systems and standard tools
  ISCAR ISCAR
Workpiece Material AISI 4340 AISI 4340
Operation Turning Turning
Insert WNMG 432-M3P IC8250 WNMG 332-M3P IC8250
Cutting speed Vc (SFM) 660 660
Feed rate f (inch/rev) 0.014 0.014
Depth of cut ap (inch) 0.12 0.12
Tool PWLNL 16-4 PCLNL 16-4with adapter
Tool life (min) 18 18
 
DISPLACEMENT TEST
Application: Interrupted
Material: AISI 1045
ap =0.12”
f =0.012 inch/rev
Vc =660 SFM
Application: Continuous
Material: AISI 4340
ap =0.12”
f =0.014 inch/rev
Vc =660 SFM
Z Displacement
Passes
[inch]
Y Displacement
Passes
[inch]
PCLNL 16-14 (tool with pocket adapter)


PCLNL 16-14 (tool with pocket adapter)




ISCAR CNMG 43 to CNMG 33
ISCAR CNMG 64 to DOVE IQ TURN
ISCAR CNMG 43 to WNMG 33
ISCAR CNMG 43 to LOGIQ 4 TURN
ISCAR SNMG 43 to SNMG 33
ISCAR WNMG 43 to WNMG 33


The NPA017-2019's inch pdf file: View (PDF) or Download (ZIP)
Terms of Use and Legal Disclaimer    Privacy Statement
© ISCAR Metals, Metalworking Tools (Iscarmetals.com) All Rights Reserved.