• TECHKNOW
  • TECHKNOW

    Resize
    NEW FAQ ADDED
    X

    MILLING
    NPA 20/2018 INCH


    CHAMFMILL

    Front and Back Chamfer Milling Tools


    Highlights
    New CHAMFMILL tools for front and back chamfering, carrying PNMT 06 pentagonal inserts with five cutting edges for front chamfering and five for back chamfering.



    ISCAR is introducing the CHAMFMILL family of indexable milling cutters for front and back chamfering.

    The new cutters carry star-shaped (pentagonal) double-sided inserts with 10 cutting edges - 5 intended for front chamfering and 5 for back chamfering.

    The main applications of the new tools include machining outer and inner small chamfer widths and removing burrs.

    Insert Features
    • 5 cutting edges for front chamfering
    • 5 cutting edges for back chamfering
    • Produced from the advantageous IC830 ISCAR’s SUMO TEC carbide grade
    • Maximum width of machined 45° chamfer is .060”


     



    Tool Features
    • Two shank configurations are available:
      - Cylindrical shank
      - Replaceable milling heads with MULTI-MASTER adaptation
    • Available in .458, .655 and .734 inch tool diameters
    • Suitable for back milling chamfers in.394” minimum diameter holes
    • Polish coating to ensure better chip flow and tool protection from corrosion and wear


    Applications
    • Machining main engineering materials: steel (ISO P), stainless steel (ISO M) and cast iron (ISO K)
    • Front chamfering, back chamfering, eliminating hand de-burring


    Benefits
    • Economical: inserts with 5 front and 5 back cutting edges
    • Productive machining due to high cutting speed


    Recommended cutting conditions
    Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
    * ISCAR material group in accordance with VDI 3323 standard
    ** Quenched and tempered
    1. The table provides reference cutting conditions, it should be adjusted according to the condition of the machine tool and workpiece
    2. Wet cutting is recommended to obtain good surface quality.
    3. In case built-up edge occurs during cutting stainless steel, use soluble oil.


    CH45-PN06
    Upper and Bottom Chamfering Endmills Carrying Pentagonal Inserts
    (1) Number of inserts
    (2) Minimum penetration diameter for back chamfering
    (3) Item weight



    CH45-MM-PN06
    Upper and Bottom Chamfering Endmills with MULTI-MASTER Threaded Adaptation
    • Do not apply lubricant to the MULTI-M ASTER threaded connection
    (1) Number of inserts
    (2) Key flat size
    (3) Minimum penetration diameter for back chamfering
    (4) Item weightt




    PNMT 0602-TN
    Pentagonal Inserts for Upper and Bottom Chamfering




    The NPA20-inch-2018's pdf file: View (PDF) or Download (ZIP)