PARTING, GROOVE-TURN, THREADING, TOOLING
NPA 03/2018
Expanding the Multi Connection (MC) JHP Line - Tools with Bottom Fed High Pressure Coolant Channel for Mounting on VDI DIN69880 Tool Holders
Highlights
ISCAR is expanding the Multi Connection (MC) JHP Line by adding parting, grooving, threading and turning tools for VDI tool holders with a bottom fed coolant system.
The new system consists of specially designed JHP-MC turning and grooving tools with a bottom coolant inlet hole and VDI-JHPMC tool holders featuring a long coolant outlet slot that enables adjustment of the tool’s overhang.
VDI DIN69880 is the most popular quick change adaptation system for CNC turning machines with disc-type turrets. This standard holder adaptation serves mainly stationary turning or drilling tools.
The tools are widely used by European, Japanese, Korean, USA, Chinese and Taiwanese MTBs, due to their simplicity, low-cost and tool clamping rigidity.
VDI DIN69880 Characteristics
- Easy and fast set-up
- High stiffness, thanks to straight shank and flange face contact
- Rigid design due to a serrated clamping system
- High accuracy and center height repeatability
- Compact and light design
- Efficient coolant supply internally through the tool and externally through the flange
JETCUT Features
The new JHP tools are essential and important in the aviation, aerospace and medical industries.
Note
The shank lengths of the tools are shorter than the lengths of equivalent standard tools - adjusted to the VDI tool holders.
Max. tool overhang
Min. tool overhang
DGTR/L-B-D-JHP-SL-MC
Parting and Grooving Tools with Bottom Inlets for High Pressure Coolant
Parting and Grooving Tools with Bottom Inlets for High Pressure Coolant
(2) Cutting width maximum
Note: Parameter designations are according to ISO13399 standard.
TGTR/L-JHP-MC
Parting and Grooving Toolholders with Bottom Inlets for High Pressure Coolant Carrying TANG-GRIP Inserts
Parting and Grooving Toolholders with Bottom Inlets for High Pressure Coolant Carrying TANG-GRIP Inserts
(2) Cutting width maximum
Note: Parameter designations are according to ISO13399 standard.
GHDR/L-JHP-MC (short pocket)
Grooving and Turning Tools with Bottom Inlet Coolant Channels
Grooving and Turning Tools with Bottom Inlet Coolant Channels
(1) Cutting width minimum
(2) Cutting width maximum
PCHR/L-24-JHP-MC
Grooving, Parting and Recessing Tools Carrying PENTA Inserts with Bottom Inlets for High Pressure Coolant
Grooving, Parting and Recessing Tools Carrying PENTA Inserts with Bottom Inlets for High Pressure Coolant
(2) Cutting width maximum
(3) For specific information, refer to insert data.
Note: Parameter designations are according to ISO13399 standard.
PCHR/L-34-JHP-MC
Grooving, Parting and Recessing Tools Carrying PENTA Inserts with Bottom Inlets for High Pressure Coolant
Grooving, Parting and Recessing Tools Carrying PENTA Inserts with Bottom Inlets for High Pressure Coolant
(2) Cutting width maximum
(3) For specific information, refer to insert data
Note: Parameter designations are according to ISO13399 standard.
MAHR/L-JHP-MC
Holders with Bottom Inlets for High Pressure Coolant Channels Carrying MODULAR-GRIP Grooving and Turning Adapters
Holders with Bottom Inlets for High Pressure Coolant Channels Carrying MODULAR-GRIP Grooving and Turning Adapters
MAHR/L-MG-XL-JHP-MC
Holders with Bottom Inlets for High Pressure Coolant Channels Carrying Parting and Grooving Adapters
Holders with Bottom Inlets for High Pressure Coolant Channels Carrying Parting and Grooving Adapters
SER/L-JHP-MC
Holders with Bottom Inlets for High Pressure Coolant Channels Carrying Parting and Grooving Adapters
Holders with Bottom Inlets for High Pressure Coolant Channels Carrying Parting and Grooving Adapters
• For multi-tooth inserts use anvils AE16M / AI16M; AE22M / AI22M; AE27M / AI27M
• For GTGA inserts, use anvil AE 16-0
(1) Right-hand inserts (ER) for right-hand tools (SER)
Note: Parameter designations are according to ISO13399 standard.
SER/L-TT-JHP-MC
External Threading Tools with Bottom Inlet Coolant Channels, Carrying Inserts with 10 Threading Corners
External Threading Tools with Bottom Inlet Coolant Channels, Carrying Inserts with 10 Threading Corners
Note: Parameter designations are according to ISO13399 standard.
DWLNR/L-JHP-MC
Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the 80° Trigon Inserts
Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the 80° Trigon Inserts
PWLNR/L-X-JHP-MC
Lever Lock Tools with Bottom Inlets for High Pressure Coolant Channels Carrying HELITURN LD WNMX and WNMG Trigon Inserts
Lever Lock Tools with Bottom Inlets for High Pressure Coolant Channels Carrying HELITURN LD WNMX and WNMG Trigon Inserts
DCLNR/L-JHP-MC
Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the 80° Rhombic Inserts
Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the 80° Rhombic Inserts
PCLNR/L-X-JHP-MC
Lever Lock Tools with Bottom Inlets for High Pressure Coolant Channels Carrying the CNMX/CNMG 80° Rhombic Inserts
Lever Lock Tools with Bottom Inlets for High Pressure Coolant Channels Carrying the CNMX/CNMG 80° Rhombic Inserts
(b) For CNMX 1207.. (CNMX 45.) inserts
(c) For CNMG 0904.. (CNMG 33.) inserts
(d) For CNMG 1204.. (CNMG 43.) inserts
PTGNR/L-X-JHP-MC
Tools with Bottom Inlets for High Pressure Coolant Carrying the TNMX and TNMG Triangular Inserts
Tools with Bottom Inlets for High Pressure Coolant Carrying the TNMX and TNMG Triangular Inserts
PCLCR/L-JHP-MC
Tools with Channels for High Pressure Coolant Carrying 80° Positive Rhombic Inserts for Swiss Automatic Machines
Tools with Channels for High Pressure Coolant Carrying 80° Positive Rhombic Inserts for Swiss Automatic Machines
DDJNR/L-JHP-MC
Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the 55° Rhombic Inserts
Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the 55° Rhombic Inserts
PDACR/L-JHP-MC
Tools with Channels for High Pressure Coolant Carrying the 55° Positive Rhombic Inserts for Swiss Automatic Machines
Tools with Channels for High Pressure Coolant Carrying the 55° Positive Rhombic Inserts for Swiss Automatic Machines
PVACR/L-JHP-MC
Tools with Channels for High Pressure Coolant Carrying the 35° Positive Rhombic Inserts for Swiss Automatic Machines
Tools with Channels for High Pressure Coolant Carrying the 35° Positive Rhombic Inserts for Swiss Automatic Machines
PVDI-B1/B4A-JHPMC
Radially Oriented, Short, Right-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
Radially Oriented, Short, Right-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
Note: Parameter designations are according to ISO13399 standard.
VDI-B1/B4AK-JHPMC
Radially Oriented, Short, Right-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
Radially Oriented, Short, Right-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
• Form B1 radial R.H. short, form B4 radial overhead L.H. short.
VDI-B2/B3A-JHPMC
Radially Oriented, Short, Left-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
Radially Oriented, Short, Left-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
Note: Parameter designations are according to ISO13399 standard.
VDI-B2/B3AK-JHPMC
Radially Oriented, Short, Left-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
Radially Oriented, Short, Left-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
VDI-C1/C4A-JHPMC
Axially Oriented, Short, Right-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
Axially Oriented, Short, Right-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
• Form C1 axial R.H., form C4 axial overhead L.H. short.
Note: Parameter designations are according to ISO13399 standard.
Note: Parameter designations are according to ISO13399 standard.
VDI-C1/C4AK-JHPMC
Axially Oriented, Short, Right-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
Axially Oriented, Short, Right-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
VDI-C2/C3A-JHPMC
Axially Oriented, Short, Left-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
Axially Oriented, Short, Left-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
• Form C1 axial R.H., form C4 axial overhead L.H. short.
Note: Parameter designations are according to ISO13399 standard.
Note: Parameter designations are according to ISO13399 standard.
VDI-C2/C3AK-JHPMC
Axially Oriented, Short, Left-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
Axially Oriented, Short, Left-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
V-ASH-MC
Axially Oriented, Short, Right-Hand, Wedge Clamping Holders for Square Shank Tools
Axially Oriented, Short, Right-Hand, Wedge Clamping Holders for Square Shank Tools
The NPA03-2018's pdf file: View (PDF) or Download (ZIP)