ISCAR is introducing a new pocket adapter (pocket size reducer) to enable clamping smaller size (FLASH-TURN) inserts into the most popular ISO toolholders and, in addition, LOGIQ 4 TURN and DOVE IQ TURN inserts.
The competitive ISOTURN market requires ISCAR to seek constantly new innovative solutions while providing conservative customers the confidence to continue using existing ISO products. To fulfill these needs, ISCAR has developed a new combination system that enables clamping small size negative inserts into standard ISO holders (both ISCAR and competitors) with the use of a simple and economic kit.
Take a standard ISO tool, replace the seat and the lever with the ones provided in the kit, and you obtain a tool that can clamp proprietary inserts such as FLASH-TURN, LOGIQ4TURN and DOVEIQTURN.
ISCAR continues to develop the ISOTURN line by adding new accessories to fit standard smaller ISO turn inserts such as CNMG 33..WNMG 33..SNMG 33… and LOGIQ CXMG 33.. into standard holders for the CNMG 43.., WNMG 43.. and SNMG 43… inserts.
In order to avoid confusion and simplify assembly, all accessories have been divided into separate sets for the indicated geometry.
The following tools can accomodate the following set combinations:
Toolholder
Set Designation
Item No.
Pocket Size Reducer
From
To
User Friendly Sets for Simple Assembly
The new sets package
INSERT
AD#-SET
SPRING
SEAT
LEVER
The following test reports show a comparison between combination systems and standard tools
ISCAR
ISCAR
Workpiece Material
AISI 4340
AISI 4340
Operation
Turning
Turning
Insert
WNMG 432-M3P IC8250
WNMG 332-M3P IC8250
Cutting speed Vc (SFM)
660
660
Feed rate f (inch/rev)
0.014
0.014
Depth of cut ap (inch)
0.12
0.12
Tool
PWLNL 16-4
PCLNL 16-4with adapter
Tool life (min)
18
18
DISPLACEMENT TEST
Application: Interrupted Material: AISI 1045 ap =0.12” f =0.012 inch/rev Vc =660 SFM
Application: Continuous Material: AISI 4340 ap =0.12” f =0.014 inch/rev Vc =660 SFM