Расширение номенклатуры резьбовых пластин для внутренней и наружной обработки

Особенности


Особенности

• Полные и неполные профили для американской специальной унифицированной резьбы UN с шагом от 64 до 4 TPI.
• Полные профили для американской специальной унифицированной резьбы UNJ (ASME B1.15) с шагом от 36 до 9 TPI.
• Пластины для наружной резьбы с неполным профилем 55° и шагом от 48 до 16 TPI.
• Метрические пластины с полным и неполным профилем ISO и шагом от 0.5 мм до 3.5 мм.
• Полные и неполные профили для NPT (национальная трубная резьбы) стандартов и шагом от 27 до 8 TPI.
• Пластины с полным профилем NPS (американская нормальная цилиндрическая трубная резьба) для механических соединений и трубной арматуры.
• Пластины с полным профилем NPTF (национальная трубная резьба - сухое уплотнение (ANSI/ASME B1.20.1-1976) для паровых, газовых и водяных труб.

Наружные пластины PG для электротехнической промышленности

• API - oil, пластины для резьбы, круглый профиль (API Spec 74-1994).
• Пластины с полным профилем для трапецеидальной резьбы ACME с шагом от 16 до 4 TPI.
• Пластины с полным профилем для трапецеидальной резьбы Stub Acme STACME с шагом от 16 до 4 TPI.
• Новые пластины с полным шлифованным профилем для высокой точности и превосходного качества поверхности.

Доступны из сплавов IC908, IC228, IC250, IC1007 с покрытием PVD и из сплава IC08 без покрытия:

• Very good wear resistance.
• Hard substrate with excellent chipping resistance, combined with TiAlN PVD coating.
• Provides high wear and oxidation resistance.
• Good choice for non-ferrous materials and cast iron.

IC1007

• A hard submicron grain size substrate with TiAlN + TiN PVD coating.
• Features high plastic deformation resistance.
• Suitable for threading steel, stainless steel and hard steels with moderate to high cutting speeds at stable conditions.
• A good choice for non-ferrous materials and cast iron.

IC228

TiN PVD coated grade on very tough substrate.
Recommended for threading steels and stainless steels at low to medium cutting speeds.

IC250

TiCN+TiN PVD coated grade on tough substrate.
Used for threading steels and alloy steels at low to medium cutting speeds. IC08

An uncoated submicron carbide grade, used for steels, stainless steel and high-temperature alloys at low cutting speeds.
Good choice for non-ferrous materials as well.

ER/L-55°
External Laydown Threading Inserts with a 55° Partial Profile for General Industries

• For threading between walls use GRIP-type inserts TIP-WT, GEPI-WT, TIPI-WT
• New
(1) With pressed chipformer
(2) Threads per inch maximum
(3) Threads per inch minimum



ER/L-60°
External Laydown Threading Inserts with a 60° Partial Profile for General Industries

• For threading between walls use GRIP-type inserts SCIR/L B/F -MTR/L, TIP-MT, GEPI-MT, TIPI-MT.
• New
(1) With pressed chipformer
(2) Thread pitch minimum (mm)
(3) Thread pitch maximum (mm)
(4) Threads per inch maximum
(5) Threads per inch minimum



IR/L-60°
Internal Laydown Threading Inserts with a 60° Partial Profile for General Industry

• New
(1) With pressed chipformer
(2) Thread pitch minimum (mm)
(3) Thread pitch maximum (mm)
(4) Threads per inch maximum
(5) Threads per inch minimum



ER/L-ISO
External ISO Metric (DIN13 12-1986 class: 6g) Laydown
Threading Inserts for General Industry

• For threading between walls use GRIP-type inserts TIP-ISO class: 6g
(1) Multi-tooth
(2) With pressed chipformer
(3) Thread pitch
(4) Number of teeth per corner



• For threading between walls use GRIP-type inserts TIP-ISO class: 6g
• New
(1) Multi-tooth
(2) With pressed chipformer
(3) Thread pitch
(4) Number of teeth per corner



IR/L-ISO
Internal ISO Metric (DIN13 12-1986 class 6H) Laydown Threading Inserts for General Industry

• Tolerance: Class 6H.
(1) With pressed chipformer
(2) Multi-tooth
(3) Thread pitch
(4) Number of teeth per corner



• Tolerance: Class 6H.
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) Thread pitch
(4) Number of teeth per corner



• Tolerance: Class 6H.
(1) With pressed chipformer
(2) Multi-tooth
(3) Thread pitch
(4) Number of teeth per corner



ER/L-UN
External American UN Full Profile (UN, UNC, UNF, UNEF)
Laydown Threading Inserts for General Industry

• Tolerance: Class 2A
• For threading between walls use GRIP-type insert TIP-UN
(1) With pressed chipformer
(2) Multi-tooth
(3) Threads per inch
(4) Number of teeth per corner



• Tolerance: Class 2A
• For threading between walls use GRIP-type insert TIP-UN
(1) With pressed chipformer
(2) Multi-tooth
(3) Threads per inch
(4) Number of teeth per corner



IR/L-UN
Internal American UN Full Profile (UN, UNC, UNF, UNEF)
Laydown Threading Inserts for General Industry

• Tolerance: class 2B,ANSI B1, 3M-1986.
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) With pressed chipformer
(4) Threads per inch
(5) Number of teeth per corner



• Tolerance: class 2B,ANSI B1, 3M-1986.
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) With pressed chipformer
(4) Threads per inch
(5) Number of teeth per corner



• Tolerance: class 2B,ANSI B1, 3M-1986.
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) With pressed chipformer
(4) Threads per inch
(5) Number of teeth per corner



ER/L-NPT
External NPT (National Pipe Threads) Full Profile Laydown
Threading Inserts for Steam, Gas and Water Pipes

• For threading between walls use GRIP-type insert TIP-NPT.
• National Pipe Threads ANSI/ASME B1.20.1-1983
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) Threads per inch
(4) Number of teeth per corner



IR/L-NPT
Internal NPT (National Pipe Threads) Full Profile Laydown Threading Inserts for Steam, Gas and Water Pipes

• National Pipe Threads ANSI/ASME B1.20.1-1983.
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) Threads per inch
(4) Number of teeth per corner



IR/L-NPTF
Internal NPTF (National Pipe Threads) Full Profile Laydown Threading Inserts for Steam, Gas and Water Pipes

• (National Pipe Threads-Dry seal) ANSI/ASME B1.20.1-1976
• New
(1) Threads per inch



ER/L-BSPT
External BSPT (British Standard Pipe) B.S.21-1957
Full Profile Laydown Threading Inserts

• For threading between walls use insert TIP-BSPT
• New
(1) With pressed chipformer
(2) Threads per inch



IR/L-BSPT
Internal BSPT (British Standard Pipe) B.S.21-1957 Full Profile Laydown Threading Inserts

• New
(1) With pressed chipformer
(2) Threads per inch



ER/L-STACME
External STUB ACME Laydown Threading Inserts with a Shallow ACME Profile for Control Valves

• STUB ACME ASME/ANSI B1.8-1988 Class 2G
• New
(1) Threads per inch



IR/L-STACME
Internal STUB ACME Laydown Threading Inserts with a Shallow ACME Profile for Control Valves

• Tolerance: Class 2G.
• New
(1) Threads per inch



ER/L-ACME
External ACME Profile Laydown Threading Inserts for Feed Screws

• ACME ASME/ANSI B1.5-1988 Class 3G
• New
(1) Threads per inch



IR/L-ACME
Internal ACME Profile Laydown Threading Inserts for Feed Screws

• ACME ASME/ANSI B1.5-1988 Class 3G
• New
(1) Threads per inch



ER/L-RND
External DIN405 Round Laydown Threading Inserts for Fire Fighting and Food Industry Pipe Couplings

• Tolerance: Class 7H
• New
(1) With pressed chipformer
(2) Threads per inch



ER/L-UNJ
External UNJ Profile Laydown Threading Inserts for the Aviation and Aerospace Industries

• UNJ MIL-S-8879C 9-1992 Class 3A
• Only right-hand inserts are available in grade IC806 and IC1007
• New
• Thread milling application available only for inserts size 06, 08, 11
(1) Threads per inch



IR/L-UNJ
Internal UNJ Profile Laydown Threading Inserts for the Aviation and Aerospace Industries

• Thread milling application available only for inserts size 06, 08, 11
• New
(1) Threads per inch



ER/L-TR
External Trapeze Shaped DIN103 Laydown Threading Inserts for Feed Screws

• DIN 103 04/1977,1502901/1977 Class 7e
• New
(1) One cutting edge only
(2) Thread pitch



ER/L-ABUT
External American Buttress Laydown Threading Inserts for High Force Transmission in One Direction

• ANSI B1.9-1973 Class 2
• New
(1) Threads per inch



IR/L-ABUT
Internal American Buttress Laydown Threading Inserts for High Force Transmission in One Direction

• ANSI B1.9-1973 Class 2
• New
(1) Threads per inch



ER/L-API
External API - Oil Thread Profile Laydown Threading Inserts

• New
(1) V-0.040
(2) V-0.038R
(3) V-0.050
(4) Threads per inch
(5) Connection no. or size



IR/L-API
Internal API - Oil Thread Profile Laydown Threading Inserts

• 0.050, API Spec 74-1994
• New
(1) V-0.040
(2) V-0.038R
(3) V-0.050
(4) Threads per inch
(5) Connection no. or size



ER-PG
External Threading Inserts for the Electrical Industry

• New
(1) Threads per inch



ER/L-NPS
External NPS Full Profile Laydown Threading Inserts for Mechanical Joints and Pipe Fittings

• For threading between walls use GRIP-type insert TIP-NPT.
• National Pipe Threads ANSI/ASME B1.20.1-1983
• New
(1) Threads per inch






The NPA35-2021's pdf file: View (PDF) or Download (ZIP)