Page 25 - CBN_2018
P. 25
IB25HA + Chip Breaker
HM – for medium and
rough cutting
Relatively wide chip breaker
allows cutting control at large
depth of cut PCBN INSERTS
HF – for high
surface finish
The flat surface on the
corner allows excellent
chip control at
small depth of cut
New chip breakers for hardened materials
when turning hard materials: long and
tangled chips are produced.
Chip Breaking Area
1.0
Depth of cut [mm] HM
0.5
HF
0.1 0.2
Feed rate [mm/rev]
25