Page 21 - Aluminium_wheel_brochure_2022_en

OAL
GHIUR/L-C-22.5A-8V HF
22.5° Approach Angle Bars for DMIN CDX
Facing and Internal Machining 50°
KAPR min
CDX WF DCONMS
KAPR 95° DMIN
LH Right-hand shown
M E T R I C
Designation CW DCONMS DMIN CDX OAL LH HF WF KAPR (1)
GHIUR/L 40C-22.5A-8V 8.00 40.00 300.00 28.50 250.00 60.0 18.0 21.00 22.5
• Upper jaw with hard coating to sustain chip deflection
Tool cutting edge angle
(1)

Spare Parts

Designation
GHIUR/L-C-22.5A-8V SR M6X20 DIN912 HW 5.0 PL 40

DMIN CDX
GHIUR/L-UC
45° Undercutting Bars for Internal KAPRmin DMIN WF DCONMS
Turning Aluminum Wheels WFX
CW HF
45˚ LH
OAL
Right-hand shown
M E T R I C

Designation CW DCONMS DMIN CDX (1) OAL LH WFX WF HF
GHIUR/L 40UC-6 6.00 40.00 70.00 0.00 (2) 350.00 75.0 23.80 24.7 18.0 SR M6X20 DIN912 HW 5.0 PL 40
GHIUR 50UC-6 6.00 50.00 78.00 0.00 (3) 350.00 75.0 28.80 29.7 23.0 SR M6X20 DIN912 HW 5.0 PL 40
GHIUR/L 40UC-8 8.00 40.00 68.00 0.00 (4) 350.00 79.0 28.80 26.0 18.0 SR M6X20 DIN912 HW 5.0 PL 40
GHIUR 50UC-8 8.00 50.00 58.00 0.00 (5) 350.00 80.0 30.20 31.4 23.0 SR M6X20 DIN912 HW 5.0 PL 40
(1) Cutting depth maximum (2) For bore diameter more than 200, CDX is 1.3 mm (3) For bore diameter more than 200, CDX is 2.0 mm
(4) For bore diameter more than 200, CDX is 2.8 mm (5) For bore diameter more than 200, CDX is 6.0 mm

DMIN CDX
GHIUR/L-UC
45° Undercutting Bars for Internal 45°(min.) DMIN WF DCONMS
Turning of Aluminum Wheels T WFX
CW HF
45˚ LH
OAL
Right-hand shown
I N C H

Designation CW DCONMS DMIN CDX (2) OAL LH WFX WF HF
GHIUR 50.8UC-6 .236 2.000 2.360 .000 (3) 14.000 2.95 1.250 .00 .906 SR M6X16 DIN912 SR M6X8 DIN916 HW 5.0 PL 40
GHIUR 38.1UC-8A (1) .315 1.500 2.680 .000 (4) 14.000 2.50 1.020 .98 .669 SR M6X20 DIN912 SR M6X8 DIN916 HW 5.0 PL 150
(1) Upper jaw with hard coating to sustain chip deflection
(2) Dimension for minimum bore diameter
(3) For bore diameter more than 7.87, Tmax is .051"
(4) For bore diameter more than 7.87, Tmax is .13"
21