Page 17 - HOLE_MAKING_CATALOG_INCH_2022_P447-P626
P. 17
(a)
MTT-MB Tt˚
MB Modular Connection
System with DIN 228/B 1806 DCONWS
Morse Taper Shanks ITS BORE
LPR
(a) Cutting edge position
Designation Tt° DCONWS LPR Lbs
MTT 5-MB63 MT5 2.4803 2.559 4.76 HW 8.0
• Verify that the weight of the entire tool assembly does not exceed the machine spindle's carrying capability.
(a)
MTD-MB Tt˚
MB Modular Connection
System with DIN 228/A 220 CRKS DCONWS
Morse Taper Shanks
LPR
(a) Cutting edge position
Designation Tt° DCONWS LPR CRKS Lbs
MTD 4-MB50 MT4 1.9685 2.480 M16 2.05 HW 6.0
MTD 4-MB50 SIP MT4 1.9685 2.480 M14 2.17 HW 6.0
• Verify that the weight of the entire tool assembly does not exceed the machine spindle's carrying capability.
THID LSCMS LF
DIN2079-MB
MB Modular Connection
System with DIN 2079 Spindle BD_2 DCONMS DCONWS BD
Connecting Interface DBC
LB
Designation LF DCONWS LSCMS LB BD BD_2 DCONMS DBC THID Lbs
DIN2079 MB50 40 1.378 1.9685 .394 .827 3.543 4.331 3.500 2.626 M12 4.31 HW 6.0
DIN2079 MB63 40 1.850 2.4803 .394 1.220 3.543 4.331 3.500 2.626 M12 4.54 HW 8.0
DIN2079 MB63 50 1.772 2.4803 .472 1.220 5.315 5.906 5.062 4.000 M16 10.14 HW 8.0
DIN2079 MB80 50 1.969 3.1496 .472 1.417 5.315 5.906 5.062 4.000 M16 11.03 HW 8.0
• Standard connection plate that can be assembled easily on most CNC spindle machines with a DIN2079 interface. This connection plate enables the use of ITS BORE
components with the MB connection by using any standard adapter with four screws. It is affixed to the machine spindle.
463