Page 22 - MILLING_CATALOG_INCH_2022_P229-P360

FACE MILLS F90LN-N15 DCONMS APMX OAL=LF DC=1.968”, a=8˚, KAPR=91˚
DHUB
a°
90° Face Mills with LN..1506...
APMX
KAPR
Tangentially Clamped Inserts
.275
DC
DC=2.48", a=6°, KAPR=90°
DC≥3.937”, a=4.5˚, KAPR=90˚
Designation
OAL
DC
F90LN D2.00-05-.75-R-N15
5
A
.750
1.850
.551
.80
F90LN D3.00-06-1.00-R-N15 (1) 2.000 CICT (2) APMX 1.570 DHUB DCONMS Arbor (3) Lbs
.551
6
1.000
2.756
2.000
3.000
2.10
B
F90LN D3.00-09-1.00-R-N15 (1) 3.000 9 .551 2.000 2.755 1.000 B 2.17
F90LN D4.00-08-1.50-L-N15 (1) 4.000 8 .551 2.000 3.189 1.500 B 3.42
F90LN D4.00-08-1.50-R-N15 (1) 4.000 8 .551 2.000 3.189 1.500 B 3.44
• Left-hand cutters are designated by a red groove • For user guide see pages 586-591
(1) For internal coolant, use a matching coolant set (should be ordered separately)
(2) Number of inserts
(3) For adaptation see page 592
For inserts, see pages: LNAR 1506 (529) • LNAR 1506 PN-R-S (PCD) (530) • LNAT 1506-W (530) • LNAT 1506..PN-N MM (530) • LNAW-15 (CBN) (526) • LNHW 1506
PNTN (ceramic) (529) • LNKX 1506 1.5X45 PN-N (528) • LNKX 1506PN-N PL (528) • LNKX/LNMT 1506PNTN/PN-N MM (527) • LNMT 1506PN-R-TS (527) • LNMT/LNHT
1506...-N HT (529) • LNMT/LNHT 1506PN-R HT (528) • LNMW 1506 PNTN (527)

Spare Parts
Designation
F90LN D2.00-05-.75-R-N15 SR 34-535 SW6-T-SH BLD T15/M7 SR UNF 3/8X1 B18.3
F90LN D3.00-06-1.00-R-N15 SR 34-535 SW6-T-SH BLD T15/M7
F90LN D3.00-09-1.00-R-N15 SR 34-535 SW6-T-SH BLD T15/M7
F90LN D4.00-08-1.50-L-N15 SR 34-535 SW6-T-SH BLD T15/M7
F90LN D4.00-08-1.50-R-N15 SR 34-535 SW6-T BLD T15/M7

250 ISCAR