Page 22 - MILLING_CATALOG_INCH_2022_P361-P592

USER GUIDE
SLOTTING & SLITTING CUTTERS

1 4 Indexing

ETS L -type key is added to the cutter package.
The key has a ball shape on the end of its longer side.

SDN
FDN
Feed Direction:
Down (climb) milling is recommended.

LNET
✔
2 Setting the Overhang
ETS..- T-type Slotting Cutters
Overhang Do not clamp insert with a broken corner
Designation Dc in the outer bottom position.
OHN (min) OHX (max)
ETS D1.25 1.25 .80 1.93
ETS D1.50 1.50 1.34 2.50
ETS D2.00 2.00 1.06 2.60 ✗
ETS D2.50 2.50 1.06 2.60

∅DC 5 Tightening Torque
5.2-6.1 Lb x in
Overhang
6 Tightening

OHX
OHN

Use the short side for Use the long side for
tightening and initial release quick driving and release
3 Lubrication - Important! Important note: To avoid indexing problems, insert clamping screws
and replace keys on a regular basis according to wear.
For every indexing, lubricate screws before mounting.
Grease should cover the screw’s thread and cone head. 7 Width of Cut
for ap=.125 - .269” - use the following table
ap Insert Screw Key
.125 LNET 081804-TN-N SR 114-018-L2.50
.156 LNET 082604-TN-N SR 114-018-L3.40
.175 LNET 082804-TN-N T-6/5
.187 LNET 083004-TN-N SR 114-018-L4.40 T-6/5-L
.207 LNET 083204-TN-N SR 114-018-L4.40
.250 LNET 083504-TN-N SR 114-018-L5.30
.269 LNET 083704-TN-N

382 ISCAR