Page 23 - Turning_catalog_INCH_2022_45_P509-690
P. 23
DGAD, HGAD 1.4N/2N/3N CUTDIA DGAD 4N/5N/6N
DGAD/HGAD CUTDIA
Parting and Grooving Adapters for HF OAH HF OAH
DO-GRIP Double-Ended Inserts PARTING
OAL CWN-CWX OAL WB
CWN-CWX WB WB_2
Designation CWN (2) CWX (3) WB WB_2 OAH HF OAL CUTDIA
DGAD 1.4N .055 .055 .039 .126 1.181 .945 1.634 1.102 EDG 23B*
DGAD 2N .075 (4) .098 .063 .126 1.181 .945 1.634 1.260 EDG 33A*
(4)
DGAD 3N (1) .118 .125 .094 .157 1.181 .945 1.634 1.260 EDG 33A*
HGAD 3N .118 .118 .094 .157 1.181 .945 1.988 1.968 EDG 23B*
DGAD 4N .157 .157 .126 - 1.181 .945 1.988 1.968 EDG 33A*
DGAD 5N .189 .197 .157 - 1.181 .945 1.988 1.968 EDG 33A*
DGAD 6N .236 .250 .205 - 1.181 .945 1.988 1.968 EDG 33A*
• DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified - see page 531
• For user guide, see pages 594-603
(1) Only the DGN/R/L inserts are suitable for this adapter
(2) Minimum cutting width
(3) Maximum cutting width
(4) For .039" inserts, modify adapter
* Optional, should be ordered separately
For inserts, see pages: DGN-P (539) • DGN-UT/UA (539) • DGN-W (534) • DGN-WP (540) • DGN-Z (538) • DGN/DGNC/DGNM-C (533)
• DGN/DGNM-J/JS/JT (535) • DGR-P (540) • DGR-WP (541) • DGR-Z/ZS (538) • DGR/L-C DGRC/LC-C (534) • DGR/L-J/JS (536) • GRIP (277)
• GRIP (full radius) (278) • GRIPA (278) • GRIPA (full radius) (279) • HGN-C (541) • HGN-J (542) • HGN-UT (542) • HGR/L-C (541) • HGR/L-J/JS (542)
For holders, see pages: MAHPR/L-JHP (289) • MAHR/L-JHP (288) • MAHR/L (288) • MAHPR/L (289) • C#-MAHD (679) • C#-MAHPD (680)
• C#-MAHDR-45 (678) • C#-MAHDOR (678) • HSK A63WH-MAHUR/L (688) • HSK A63WH-MAHDR-45 (687) • HSK A63WH-MAHDOR (687) • IM-MAHD (689)
• IM-MAHPD (689) • C#-MAHD-JHP (679) • C#-MAHPD-JHP (680) • HMSN-New Britain (529) • HMSDV (530) • DGHAL-DECO (Metric) (529) • HSTBS (529)
Depth Capacity for DGN/R-1002J Insert on Standard Holders
Depth: T Dmax Depth: T Dmax T
Up to .047 No limit Up to .087 1.272
.051 32.677 .091 1.154 Dmax
.055 8.583 .094 1.051
.059 4.961 .098 .976
.063 3.480 .102 .913
.067 2.685 .106 .854
.071 2.189 .110 .807
.075 1.846 .115 .764
.079 1.602 .118 .724
.083 1.417
Standard Holders Modification
To achieve no limitation on the workpiece diameter
up to .118” depth, the steel support under the Cutting Edge
insert should be ground, as per the sketch.
.024 .130
CUTDIA
DGAD-B-D
Parting and Grooving HF OAH
Screw-Clamped Adapters for
DO-GRIP Double-Ended Inserts OAL
CWN-CWX WB WB_2
Designation CWN (2) CWX (3) WB WB_2 OAL CUTDIA HF OAH
DGAD 1.4B-D16 .055 .055 .039 .126 1.449 .630 .945 1.193
DGAD 1.5B-D20 (1) .039 .059 .039 .126 1.614 .787 .945 1.193
DGAD 2B-D20 .075 .098 .063 .126 1.614 .787 .945 1.193
• Up to.118" depth, without any limitation on the diameter.
• DG..1.0 insert can also be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified-see page 531
• For user guide, see pages 594-603
(1) Do not use DG.. 1.4 on this tool!
(2) Minimum cutting width
(3) Maximum cutting width
For inserts, see pages: DGN-LF/LFT (537) • DGN-P (539) • DGN-UT/UA (539) • DGN-WP (540) • DGN-Z (538) • DGN/DGNC/DGNM-C (533)
• DGN/DGNM-J/JS/JT (535) • DGR-P (540) • DGR-WP (541) • DGR-Z/ZS (538) • DGR/L-C DGRC/LC-C (534) • DGR/L-J/JS (536)
For holders, see pages: C#-MAHD-JHP (679) • C#-MAHPD-JHP (680) • MAHPR/L-JHP (289) • MAHR/L-JHP (288) • MAHR/L (288) • MAHPR/L (289)
• C#-MAHD (679) • C#-MAHPD (680) • C#-MAHDR-45 (678) • C#-MAHDOR (678) • HSK A63WH-MAHUR/L (688) • HSK A63WH-MAHDR-45 (687)
• HSK A63WH-MAHDOR (687) • IM-MAHD (689) • IM-MAHPD (689) • HMSN-New Britain (529) • HMSDV (530) • DGHAL-DECO (Metric) (529) • HSTBS (529)
531